512412 Active holder with cig-plug for the Asus Google Nexus 7
- Brand: Brodit
- Product Code: brodit-512412
- 1 Year Warranty
Active holder with cig-plug
Brodit holder mounting bracket sold separately.
- Easy Returns
Brodit Active holder with cig-plug - 512412
Use an active holder for your Nexus 7 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Galaxy Tab into place in the holder, and to take it with you when leaving the car.
Check the compatibility section if supported with your mobile phone
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
- Brodit Holder (mounting bracket sold seperately)*
- Fitting Instructions
*Requires a ProClip mounting bracket or similar product to secure the holder without damaging the dashboard. Visit the fitting accessories section and you will find different options to suit your requirements.
some Brodit accessories are dispatched direct from our suppliers as they are special order. If the item is not in-stock in the UK with our supplier it may have a lead time of 5-7 working days for delivery. Please check with us before ordering Brodit items.
Different Types of Holders Available
Holder with Pass-Through Connector: All cables that can be used with the phone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have to connect it manually to the phone each time you put it in the holder. (Cable not included).
Holder for Cable Attachment: For use with handsfree Bluetooth kits eg. Parrot MK9000-series, Nokia CK-series. You easily attach the hands-free cable to the holder. It then connects automatically to the phone when you put it in the holder, so you do not have to connect the car kit cable manually each time. Check compatibility section to check which car kit holder supports.
Passive holder: You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.
Active holder with cig-plug: Holder has built-in charging cable which plugs into 12v adapter.
Active holder for fixed installation: Holder has built-in charging cable which has to be wired into car battery.
If you are unsure about the suitability of this product with your car please submit an enquiry form by clicking ask a question found at the top of this page.
Brodit Active holder with cig-plug - 512412
|Asus||Google Nexus 7||With tilt swivel. (Attach onto a ProClip Mounting Platform)||1|
1. Asus Google Nexus 7 (For all countries).
If you are unsure about the compatibility of this product with your car please submit an enquiry form by clicking ask a question found at the top of this page.
Installation is easy, with no special tools required. Detailed instructions with pictures are included. Please read all of the instructions and look at the pictures before attaching the holder. Full Instructions also come with your Brodit holder.
Requires a ProClip mounting bracket or similar product to secure the holder without damaging the dashboard. Visit the fitting accessories section and you will find different options to suit your requirements.
|You install the product like this...|
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Slide the device sideways carefully into the holder until you feel that it is properly attached to the connector.
3. To remove the device from the holder: Slide the device sideways carefully. Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.
4. The holder is in place.
If you require help with installation please submit our enquiry form by clicking ask a question found at the top of this page after you have purchased the item. We will more than happily provide free telephone or email support.
|Product Type||Phone Holder|
Alpine INE-W710DC 7” Navigation with TomTom maps with Apple CarPlay and Android Auto for Trucks and Motor Homes
7” Navigation with TomTom maps including trucking feature, compatible with Apple CarPlay and Android..
9” Touch Screen Navigation for Volkswagen Golf 7 with TomTom maps, compatible with Apple CarPlay and..
9” Touch Screen Navigation for Volkswagen Golf 6 with TomTom maps, compatible with Apple CarPlay and..
9” Touch Screen Navigation for Fiat Ducato 3, Citroën Jumper 2 and Peugeot Boxer 2 with TomTom maps,..