{
"schema_version": 1,
"id": 14807,
"name": "BMW 1-Series Double DIN Car Stereo Fitting Kit with Steering Controls/PDC Retention (AUTO AIR CON)",
"url": "https://www.carcommunications.co.uk/bmw-1-series-double-din-car-stereo-fitting-kit-with-steering-controls-pdc-retention-auto-air-con",
"brand": "incartec",
"model": "FK-889-PDC",
"sku": "FK-889-PDC",
"gtin": "",
"mpn": "",
"identifiers": {
"model": "FK-889-PDC",
"sku": "FK-889-PDC"
},
"description": "BMW 1-Series Double DIN Car Stereo Fitting Kit with Steering Controls/PDC Retention (AUTO AIR CON)\nComplete fitting kit to install an aftermarket Double DIN car stereo head unit and retain the original steering wheel controls and parking sensors in a BMW 1-Series 2007 (facelift model) with original automatic climate controls.\nThis Head Unit Fitting Kit Includes:\nAntenna adapter cable (21-106)\nParking sensor retention interface (25-514)\nSteering wheel control interface (49-BMW-01)\nUniversal patch lead for steering control interface (49-025)\nBMW 1-Series (auto air con) Double DIN fascia (50-889)\nFakra to DIN Antenna Adapter Cable (21-106)\nMale Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.\nParking Sensor Retention Interface (25-514)\nCANbus interface to retain the original parking distance control (PDC) tones and other vehicle warning chimes that are lost when replacing the radio in various BMW, Citroen, Peugeot, Volvo and Ford cars. The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interface reads the data in the car and reproduces the parking tones and warning chimes through an additional speaker. The interface has a universal adapter cable, this needs to be hardwired to the power, ground and CANbus wires in the car. Fitting instructions are included.\nSteering Wheel Control Interface (49-BMW-01)\nSteering wheel control interface and adapter cable for various BMW and Mini cars to fit an aftermarket radio upgrade. The cable adapts from the Quad-lock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons. The CANbus interface will also provide CANbus key present ignition, illumination, speed pulse, reverse gear and handbrake outputs. A key present ignition means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel.\nSome BMW cars go into Eco mode and the +12V supply to the radio drops causing the memory of the new radio to be lost, these cars will need a power supply directly from the battery to be supplied.\nA universal patch lead is supplied in the kit, this is to pair the steering control interface to the steering control input of Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.\nBMW 1-Series (Auto Air Con) Double DIN Fascia (50-889)\nReplacement car audio fascia to enable you to change the original radio in the car to a Double din aftermarket version. The kit includes a switch relocating panel for cars with switch panel underneath the climate controls. There is a blank plate for cars that do not have the switch panel.\nPLEASE NOTE: Modification behind the radio is required to allow space to fit a double din stereo (3 HOURS MINIMUM NEEDED) We recommend this is done by an experienced car audio technician only.\nThis kit is for 2007 onward facelift models, earlier pre facelift models do not have space for a double din unit.\nBelow is an image with examples of the pre and post facelift dashboards.\nFOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD\n{ note_description_footer }",
"category": [
"Car Accessories",
"Fitting Accessories",
"Car Stereo Fitting Kits",
"Complete Stereo Fitting Kits",
"BMW"
],
"tags": [
"BMW 1-Series Double DIN Car Stereo Fitting Kit with Steering Controls/PDC Retention (AUTO AIR CON)",
"FK-889-PDC",
"BMW"
],
"images": [
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new-.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new5.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new3.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new2.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new1.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/fittingkits/FK-889-PDC/FK-889-PDC-new4.webp"
],
"price": {
"currency": "GBP",
"amount": 271,
"regular": 271,
"on_sale": false,
"sale_ends": null,
"includes_tax": true
},
"quantity_discounts": [],
"availability": {
"in_stock": false,
"status": "out_of_stock",
"stock_status": "Special Order (Contact Us)",
"minimum_quantity": 1
},
"attributes": {
"Fascia Kit": {
"Size": "Double Din",
"Steering Control": "Yes"
}
},
"options": [],
"dimensions": null,
"weight": null,
"rating": null,
"reviews": [],
"shipping": null,
"returns": null,
"warranty": "1 Year Warranty",
"updated": "2025-10-24T16:41:13+01:00",
"store": {
"name": "Car Communications Ltd",
"url": "https://www.carcommunications.co.uk/",
"currency": "GBP"
}
}