{
"schema_version": 1,
"id": 16455,
"name": "Nissan Juke Acenta Premium (2014-2019) Double DIN Car Stereo Upgrade Fitting Kit (GLOSS BLACK)",
"url": "https://www.carcommunications.co.uk/nissan-juke-acenta-premium-2014-2019-double-din-car-stereo-upgrade-fitting-kit-gloss-black",
"brand": "incartec",
"model": "FK-972-CAM",
"sku": "FK-972-CAM",
"gtin": "",
"mpn": "",
"identifiers": {
"model": "FK-972-CAM",
"sku": "FK-972-CAM"
},
"description": "Nissan Juke Acenta Premium and N-Connecta 2014-2019 Double DIN Fitting Kit with Steering Wheel Control and Camera Retention\nThis complete Double DIN fitting kit is designed to allow the installation of an aftermarket Double DIN car stereo into selected Nissan Juke Acenta Premium and N-Connecta 2014-2019 models. The included fascia panel is specifically listed for Nissan Juke 2014-2019, finished in gloss black, and uses side fixing brackets for a flush, vehicle-specific fit with a fascia opening size of 172mm x 98mm.\nThe included steering wheel control interface adapts the original 20 pin Nissan connector to standard aftermarket ISO connectors, removing the need for a separate ISO radio replacement cable. InCarTec states that it retains the original volume, track skip, source, phone and preset skip buttons on 8-function steering wheels, while the included universal patch lead allows connection to a wide range of aftermarket stereos from brands including Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and other compatible head units.\nThis kit also includes a USB retention adapter to maintain the original USB connection and a 24-pin reverse camera retention interface to keep the standard factory reverse camera working with an aftermarket stereo. The camera retention interface converts the factory camera signal for head units with an RCA camera input, while the antenna adapter converts the Nissan grey rectangular antenna connection to a standard male DIN connection for the new radio. The blue wire on the antenna adapter must be connected to the new stereo’s antenna turn-on output to power the original antenna amplifier correctly.\nFK-972-CAM Car Compatibility\nThis fitting kit is only compatible with Nissan Juke Acenta Premium and N-Connecta 2014-2019 models with standard reverse camera. Not compatible with 360 birds eye view camera systems.\nIf you have a factory BOSE audio system you will require an additional interface, part number 20-273\nFK-972-CAM fitting kit includes:\nNissan (grey rectangle to DIN connector) antenna adapter (With male bullet connection) (21-118k)\nNissan (grey rectangle female antenna to male DIN connection) car aerial antenna adapter cable.\nThis cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, used when fitting a new aftermarket stereo.\nThe loose blue wire (male bullet) on the adapter needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.\nNissan OEM to USB-A Retention Adapter Cable (24-274)\nThis USB retention cable allows the installation of an aftermarket head unit while maintaining the factory USB connection. Compatible with Dacia, Ford, Nissan, Opel, and Renault vehicles (see full compatibility list below), it supports charging and basic media playback. USB-supported Android Auto or Apple CarPlay may be limited or unavailable. Easy plug-and-play installation preserves factory wiring, providing a seamless and professional upgrade for your vehicle’s infotainment system.\nCamera retention interface (27-246)\nThis Nissan reverse camera retention interface is designed to allow you to retain the factory OEM fitted reverse view camera when replacing the original stereo with a new aftermarket head unit. It is ideal for Nissan owners who want to upgrade their in-car entertainment system while keeping the convenience and safety of the original reversing camera.\nThis adapter is compatible with select Nissan vehicles fitted with an original factory navigation head unit and a 24-pin camera connection. It converts the factory camera signal into a format suitable for most aftermarket stereos with an RCA camera input, allowing the original reverse camera to continue functioning without the need to replace it.\nThe interface provides a vehicle-specific plug-and-play solution, connecting between the factory wiring and the new head unit. This makes installation easier and helps preserve OEM functionality, making it a practical choice for both professional installers and DIY car audio upgrades.\nInstallation notes\nConnect the Yellow RCA connector of the camera interface to the camera input connection on the back of the aftermarket head unit.\nConnect the vehicle specific connector (24 Pin) to the cars original wiring harness.\nConnect the loop on the Black wire of the camera interface to a chassis ground on the vehicle.\nConnect the Purple wire on the camera interface to the new aftermarket head units reverse signal wire. (Please refer to manufacturers instructions)\nNissan (20 pin) steering control interface (29-683)\nSteering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.\nThis interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels)\nInstallation notes\nConnect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit\nLoose black wire - Connect the radio ground earth ring to the vehicles chassis ground\nLoose pink wire - Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions)\nLoose blue wire (Amplifier turn-on) - This is only required on amplified systems such as BOSE. If your system is amplified this loose blue wire will need to be connected to the amplifier turn on cable on our amplifier integration interface, part number 20-273 (SOLD SEPERATELY)\nLoose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable.\n29-Series universal patch lead (29-025)\nUniversal patch lead to be used with In car Tec 29- series steering wheel control interfaces.\nUse for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.\nNissan Juke (2014-2019) Double DIN fascia (50-972)\nReplacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version\nThis fascia includes side fixing brackets so no fitting cage is required\nFits Nissan Juke (2014 - 2019) car models, these facelift models have wider original radios compared to the pre facelift cars.\nCOLOUR: GLOSS BLACK\nPLEASE NOTE: For Single DIN installation you will require an additional pocket\n{ note_description_footer }",
"category": [
"Car Accessories",
"Fitting Accessories",
"Car Stereo Fitting Kits",
"Complete Stereo Fitting Kits",
"Nissan"
],
"tags": [
"Juke"
],
"images": [
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(1).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(4).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(3).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(5).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(6).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lp/Incartec/FK-972-CAM/fk-972-cam%20(2).webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/29/29-683/29-683.webp",
"https://www.carcommunications.co.uk/image/cache/wp/lj/Incartec/Steering_Wheel_Stalk/Ford/Transit/29-025_patch_lead.webp"
],
"price": {
"currency": "GBP",
"amount": 154.99,
"regular": 154.99,
"on_sale": false,
"sale_ends": null,
"includes_tax": true
},
"quantity_discounts": [],
"availability": {
"in_stock": false,
"status": "out_of_stock",
"stock_status": "Special Order (Contact Us)",
"minimum_quantity": 1
},
"attributes": {
"Fascia Kit": {
"Size": "Double Din",
"Colour": "Gloss Black",
"Steering Control": "Yes"
}
},
"options": [],
"dimensions": null,
"weight": null,
"rating": null,
"reviews": [],
"shipping": null,
"returns": null,
"warranty": "1 Year Warranty",
"updated": "2026-10-20T15:25:08+01:00",
"store": {
"name": "Car Communications Ltd",
"url": "https://www.carcommunications.co.uk/",
"currency": "GBP"
}
}