Porsche Headrest Mounting Bracket - Brodit (811020)
Need any more information? Ask a question£53.99
- Easy Returns
Brodit Headrest Mounting Bracket
The headrest mount is car specific and serves as a mounting platform. Onto the headrest mount you can attach any holder of your choice, e.g. iPad or a multimedia monitor holder. Example: If you are installing a iPad in the car you will need two parts; the correct headrest mount (specific for your car) and the correct holder (specific for your iPad). Your device will be safe and convenient -always within easy reach. The headrest mount is car specific and easy to install. The installation is quick, no special tools or dismantling of the headrest is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
Check the compatibility section if supported with your car make and model
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The headrest mount faceplate has predrilled holes which makes the attachment of a holder easier.
All Brodit's holders can be attached onto the headrest mount, but some holders are crashtested and approved for use on Brodit's headrest mounts (look for crash test labeling)..
This headrest mount fits a number of vehicles, some of them are listed in the compatibility section. If your car model is not listed? Measure the headrest in your vehicle. If the following measurements match, this product will fit in your car.
Minimum inner size between headrest bars: 123 mm
Maximum outer size between headrest bars: 183 mm.
Key Features
- Mount for fixing iPad, PlayBook or similar portable device holder to your car headrest
- Easy-Fit robust and stylish headrest mounting bracket
- Made from high quality ABS black plastic
Whats Included?
- Car specific Headrest Mount (device specific holder sold separately)
- Fitting Instructions
If you are unsure about the suitability of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page
Brodit Headrest Mount 811020
| Porsche Compatibility Chart | |||
| Car Model | Year | Description | Notes |
| Cayenne | 2003 - 2011 | Fits headrests with the following measurements between the bars | 1 |
1. Will fit cars in all countries, left and right hand drive.
Note: This headrest mount fits a number of vehicles, some of them are listed in the compatibility section above. If your car model is not listed? Measure the headrest in your vehicle. If the following measurements match, this product will fit in your car.
Minimum inner size between headrest bars: 123 mm
Maximum outer size between headrest bars: 183 mm
If you are unsure about the compatibility of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page
Installation is easy, with no special tools required. Detailed instructions with pictures are included.
These are detailed fitting Instructions for the Brodit Headrest mount for your car. This is how you fit your mount onto the headrest. Full Instructions also come with your mount.
Please read all of the instructions and look at the pictures before attaching the mount.
| You install the product like this... | |||
1. | 2. | 3. | 4. |
1. Use the enlcosed tool to remove the screws in the headrest mount so you get two parts. Place the back part of the headrest mount onto the front side of the headrest. Place the other part of the headrest, equipped with a mounting plate, onto the back part of the headrest mount so the screws match the holes. Tighten the two screws a little bit, just so the headrest mount is in place.
2. Use the other enclosed tool to loosen the screw underneath the headrest mount. Adjust the mounting plate into desired position. Tighten the screw underneath the headrest mount so the mounting plate is firmly in place.
3. Adjust the height of the headrest mount into desired position. Tighten the screws so the headrest mount is firmly in place.
4. The headrest mount is in place.
Device specific holder (eg. iPad, Blackberry PlayBook) sold separately!
If you require help with installation please submit our enquiry form by clicking ask us about this item found at the top of this page after you have purchased the item. We will more than happily provide free telephone or email support.