NAVLINKZ CAM-N168 NTSC Adjustable Mini Ball Shape Rear View Camera

CAM-N168 Mini NTSC front and rear-view camera with adjustable ball head and 2 housings. Simple installation by threaded tube with cable guide and counter nut (housing 1) or screw or adhesive housing (housing 2). Horizontal mount-under and vertical mount-on possible by rotating the ball. Professional connector cable with enough length and automotive plug connection. Easy to lay cable due to a small connector diameter and cable.

This NTSC Mini camera has an adjustable ball head, 1/4 inch CMOS HD. Features a Wide angle, 188° diagonal and IP69K rated. Can also be used as front camera. Switchable guide lines which can be adjusted for either car or truck. Can be Horizontal mount-under and vertical mount-on. Total 8.70m cable. Smaller than standard cameras on the market!

Key Features

• HD wide angle camera in plastic housing
• Can be used in 24/7 continuous operation
• IP69K waterproof with stainless steel bracket

Technical Data

• Mini ball camera NTSC (black) with 2 housings
• Housing 1: Cable-guided thread tube with counternut
• Housing 2: Screw or glue fixing
• Optional housing 3: Rubber ring for in-mount (Article No. HD-B168-02 must be ordered separately)
• Horizontal mount-under and vertical mount-on possible (by rotating the ball)
• System cable with throughput wire, e.g. for reverse signal
• Mirroring can be switched off - suitable also as front camera
• Sensor type CMOS 1/4 inch HD low-light sensitive
• 800 TV lines
• Light sensitivity 0.01Lux
• Bezel F1.2
• Angle horizontal=168°, vertical=118°, diagonal=188°
• Guide-lines can be switched off
• Guide-lines width selectable between car or truck
• Protection class IP69K
• Suitable for permanent operation (connection to ACC) - 24/7
• Mini 4pin-3V system harness with integrated throughput wire (blue)
• 8.70m total system cable length, consists of:
  •  0.30m cable fixed on camera to female 4pin-3V (Diameter 5mm)
  •  8.00m extension cable male 4pin-3V to female 4pin-3V
  •  0.40m adapter male 4pin-3V to male RCA and power wires (open ends)

Dimensions

• Camera in housing 1 (without thread tube)    25 x 26.7 x 23.5mm (W x D x H)
• Camera in housing 2    40 x 27 x 22.4mm (W x D x H)
• Diameter camera connector    5mm
• Total cable length    8.70m

General Specifications

• Power supply    +12V/24V DC (6~28V)
• Operating voltage camera    +3,3V DC
• Current consumption    50mA
• Operating temperature    -30°C to +75°C
• Storage temperature    -40°C to +80°C
• Video connection    male RCA

** Manufacturing specifications are subject to change without prior notification