Range Rover Vogue/L322 (2002-2010) Single/ Double DIN Car Stereo Upgrade Fitting Kit (STANDARD RADIO)

Complete fitting kit to install an aftermarket Double DIN car stereo head unit and retain the original steering wheel controls in Range Rover Vogue/L322 car models with Standard Audio and no amplifier.

This Aftermarket Stereo Upgrade Fitting Kit Includes:

• Antenna adapter cable (21-106)
• Steering wheel control interface (29-628)
• Universal patch lead (29-025)
• Range Rover Double DIN car audio fascia (50-983)

Antenna Adapter Cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a fakra antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering Wheel Control Interface (29-628)

Steering wheel control interface and adapter cable for various BMW cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard ISO aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio.

Universal SWC Patch Lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit.

Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Range Rover Double DIN Car Audio Fascia (50-983)

Car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

PLEASE NOTE: Modifications to the dashboard are required in order to fit the new head unit, we recommend this is done by an experienced car audio technician.

This kit is for vehicles with cars with basic original head units with no amplifier, or cars with basic original head units and the power amplifier fitted. See details below.

Basic head unit with no amplifier

Basic head unit with power amplifier

The amplifier is located in the rear left quarter panel of the boot. 

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.