Double DIN Stereo Fitting Kit (STANDARD RADIO)

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) and Fiat Talento vehicle models with standard radios.

This Head Unit Fitting Kit Includes:

• Fakra male to SMB female DAB adapter (21-037)
• Fakra to DIN aerial adapter cable with 12v phantom power (21-123)
• Steering wheel control interface (29-706)
• 29-Series Universal patch lead (29-025)
• Double DIN fascia adapter (50-942)

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH ORIGINAL STANDARD RADIO SYSTEMS , FOR MODELS WITH FACTORY NAVIGATION RADIOS PLEASE USE FK-942-NAV

Transform your van’s interior and audio system with this high‑quality Double DIN stereo fitting kit, tailored for Renault Trafic, Nissan NV300 and Vauxhall Vivaro models from 2014 onwards. It allows you to seamlessly fit a modern Double DIN head unit while preserving the factory dashboard aesthetic and retaining controls you already use.

Included in the kit are: a matt‑black fascia adapter that ensures a flush OEM‑style finish, a steering wheel control interface so your original steering buttons continue to work, a universal patch lead compatible with major aftermarket brands, and both aerial and DAB adapters to maintain radio reception without modifications. This ensures a professional, plug‑and‑play installation for your van’s audio system.

Important Notes:

On some late vehicles, around 2018 and newer, you may need to manually wire in a separate ignition live feed as these vehicles may not naturally have this supply within the original radio plugs like older models had.

Some vehicles with Stop‑Start feature will require an interface to be installed inline with the power ISO plug of the new stereo. The interface allows the unit to stay powered when the vehicle engine shuts down and restarts. If you are experiencing this with your new installation, you will need a 10‑603 adapter in addition to the fitting kit.

This kit is only compatible with vehicles originally equipped with the standard radio system; factory navigation head units require a separate navigation-specific kit.

Fakra Male to SMB Female DAB Adapter

Use this adapter to adapt a fakra DAB connector in a car to a DAB SMB connector on an after market DAB radio.

Fakra to DIN Aerial Adapter Cable with 12V Phantom Power

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) Audio SWC Interface

This interface will allow you to retain the use of the steering wheel controls with a standard original radio.

Universal Patch Lead for 29 Series Interface

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Replacement Car Audio Fascia (Matt Black)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This kit uses side fixing brackets to mount the new radio for a flush fit, so no cage is required. For single DIN fitting a universal pocket will need to be acquired.

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH THE ORIGINAL BASIC STANDARD RADIO , FOR MODELS WITH ORIGINAL NAVIGATION SYSTEM RADIOS PLEASE USE FK-942-NAV.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.