
Dashmount 711074 Upper Console Mounting Bracket Chrysler PT Cruiser 2006>
- Stock Availability: Out Of Stock
- Item Condition :
- Model: 711074
Mounting Bracket
The (711074) dashmountTM bracket will enable you to fit your car phone cradle, phone holder or iPod cradle without having to make screw holes in the dashboard fascia of your vehicle. All DashmountTM mounting brackets are TUV safety approved, beware of cheaper imitations!
Check the compatibility section if supported with your car make and model
Made from top quality steel that has a special black powder coating to ensure a neat finish. These brackets have pre drilled holes and slots to suit most of the common hands free car kit cradles and phone holders on the market. The brackets utilise either tape and grippers or the screws that are already in your vehicle but are hidden from sight. Fitting instructions are included with each bracket purchased - some trim removal may be required.
All DashmountTM brackets should be installed by a suitably qualified person. Neither Car Communications or DashmountTM accepts any responsibility for any damage caused to the vehicle whilst attempting to install the bracket.
Easy-Fit robust and stylish DashmountTM mounting bracket, giving a damage free installation of mobile phone cradles, iPod Car Kit cradles and other portable devices offering easy access while giving an integrated look with your dashboard and interior. DashmountTM brackets are vehicle specific resulting in optimum design and simple installation for your particular car make and model.
Key Features
- Damage free installation of mobile phone cradle, ipod cradles or other portable devices
- Easy-Fit robust and stylish Dashmount mounting bracket
- TUV safety approved
If you are unsure about the suitability of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
Dashmount 711074
Chrysler Compatibility Chart | |||
Car Model | Year | Description | Notes |
PT Cruiser | 2006 > | 1 |
1. May require trim removal tools. Check installation section for further details
If you are unsure about the compatibility of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
You may require trim removing tools for installing this product.
Step 1. Unscrew the Phillips head screw inside each spy ball vent: align the channel in the base of the vent to access. You do not have to remove the screw, merely release it and leave it in the channel.
Step 2. Unclip the fascia panel, at each corner of the base and then on each side, and lastly by pulling away from the clock area.
Step 3 .Locate the bracket with the lower left Torx screw securing the audio unit using an offset screwdriver.
Step 4 .Refit the fascia panel around the bracket and secure the vents. Twist the plate inwards to facilitate if required.
If you require help with installation please submit our enquiry form by clicking ask us about this item found at the top of this page after you have purchased the item. We will more than happily provide free telephone or email support.