Focal Car Speakers 2-way Compact Component Kit with Grills - Elite K2 Power ES 165 K2
- Stock Availability: Pre-Order - Contact Us
- Item Condition : New
- Model: ES165K2
- SKU: ES165K2
- 1 Year Warranty
Focal Dynamic High End Sound - ES 165 K2
Elite Power K2 Range
The ES 165 K2 speaker kit is composed of two 6½" (165 mm) woofers and has a very high sensitivity (92.8 dB/oct).The speaker drivers of the ES 165 K2 kit feature the K2 Power line’s famous yellow Kevlar® cones. Light, rigid and with excellent damping, they provide extremely dynamic sound and perfect definition. Paired with the new TMD suspension, there’s no distortion whatsoever. The phase plug in the centre of the cone improves sound dispersion around the vehicle.
The treble is reproduced by the two 'M'-shaped aramid-fibre TKM inverted dome tweeters equipped with high-fidelity bi-amplified crossovers. High frequencies (up to 22 kHz) are perfectly reproduced, smoothly and with precision.
Key Points
- Inverted dome "M"-shaped tweeter
- High sensitivity (92.8dB/oct)
- Bi-Amp
- Audiophile grade crossover
KEVLAR® CONE
PRECISION AND DYNAMICS
The speaker drivers used for the K2 Power have been completely redesigned. Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision! The K2 Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2 Power cone combines three key factors of quality acoustics:
- Rigidity
- Lightness
- Damping, for precise and dynamic sound.
TMD SUSPENSION
SAY GOODBYE TO DISTORTION
The new K2 Power TKM tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.
NEW “M”-SHAPED TWEETER
FOR A SMOOTH HIGH END
The new K2 Power TKM tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.
RADIAL VC COOLING
FOR HIGHER SPL
The new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes. This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability. This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound
PROGRESSIVE SPIDER PROFILE
IMPROVED LINEARITY AND PRECISION
The progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range
IMPROVED RELIABILITY
AN OPTIMISED CROSSOVER
The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.
Technical Characteristics
- 2-way component kit
- Diameter: 6½" (165mm)
- Voice coil diameter: 11/4" (32mm)
- Voice coil height: 05/8" (15mm)
- Motor: Magnet
- Tweeter: TKM ("M" profile aramid fiber
- inverted dome)
- Cone: Composite K2 Power "W" sandwich cone
- Surround: Tuned Mass Damper (TMD®)
- Separated crossover: 6-12/12dB (3.5kHz)
- Tweeter Adjustable level: +3; 0; -3dB/oct
- Max. power: 200W
- Nom. power: 100W RMS
- Sensitivity (2.83V/1m): 92.8dB
- Frequency response: 60Hz- 22kHz
- Impedance: 2 Ω
- Accessories: Supplied grilles
Specifications - Woofers 6.5" (165mm)
- Nominal power 100W
- Maximum power 200W
- Sensitivity (2,83V/1m) 92.8dB
- Cone Kevlar sandwich
- Nom. impedance 2Ω
- Surround Butyl
- DC resistance 1.8Ω
- VC diameter 32mm 1 17⁄64"
- Former Kapton
- Layers 2
- Wire CCAW
- Magnet (d x h) 95x20mm 3 47⁄64 x 0 25⁄32"
- Net weight 1450g 3.20lbs
Parameters - Woofers 6.5" (165mm)
- Rdc 1.8 Ω
- Fs 67Hz
- Mms 13g
- Cms 0.41mm/N
- Vas 10l
- Qts 0.55
- Qes 0.6
- Qms 7
- Bxl 4.2 N/A
- Sd 128.6cm2
- SPL 89.8dB
- Xmax 4.8mm
Specifications - TKM Tweeter 20mm
- Nominal power 15W
- Maximum power 100W
- Sensitivity (2,83V/1m) 92dB
- Cone Kevlar sandwich
- Nom. impedance 4Ω
- Surround Butyl
- DC resistance 3.5Ω
- VC diameter 20mm 0 25⁄32"
- Former Kapton
- Layers 2
- Wire Alu
- Net weight 60g 0.13lbs
Parameters - TKM Tweeter 20mm
- Rdc 3.5 Ω
- Fs 1600Hz
 | Factory fitted In-car Infotainment systems and their wiring can be complex, so we always recommend that you have your installation carried out by a qualified installer. If you wish, Car Communications can arrange for your Kit to be installed at an address of your choice anywhere in the UK. Please select from addons options above before adding the purchase to your cart. During the checkout process you will be asked for your preferred date(s) and time for the installation. Plug & Play For added peace of mind, our products can be professionally installed at your home or workplace anywhere in the UK by our qualified and accredited network of engineers.
|
