Holden Double DIN car stereo upgrade fitting kit with CAN ignition (MATT SILVER)

Complete stereo upgrade kit to install a Double DIN aftermarket car stereo head unit in select Holden vehicles with CAN ignition.

This complete head unit fitting kit includes:

• Fakra to DIN aerial adapter, 12v phantom power (21-123)
• ISO power and speaker adapter with CAN ignition interface (20-156-IGN)
• Double DIN fascia with side fixing brackets in Matt Silver (50-613/G)

Fakra to DIN aerial adapter cable with 12v phantom power (21-123)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

ISO power and speaker adapter with CAN ignition interface (20-156-IGN)

The interface generates a key present ignition supply so no extra ignition feed needs to be provided. The key present ignition feature will continue to give an ignition supply until the key is removed from the ignition barrel.

Double DIN fascia with side fixing brackets (50-613/G)

This fascia adapter panel is to fit a double din aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a grey finish and is a flush mount style so it replaces the radio trim supplied with the aftermarket radio. This gives a flush professional finish to the installation. The fascia is supplied with side fixing brackets so a radio cage is not needed. 

COLOUR: MATT SILVER

PLEASE NOTE: To remove the original radio, you will require radio release keys, part number 52-012 

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.