Hyundai I10 (2013-2019) Double DIN Car Stereo Upgrade Fitting Kit WITH STEERING CONTROLS

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in select Hyundai I10 (2013-2019) car models.

This Complete Head Unit Fitting Kit Includes:

• Hyundai antenna adapter (21-130)
• Steering wheel control interface (29-692)
• Universal patch lead (29-025)
• Double DIN fascia with brackets (50-969)

PLEASE NOTE:

• TO RETAIN USE OF THE USB/AUX PORTS YOU WILL REQUIRE OUR PART NUMBER 24-240
• FOR CARS WITHOUT STEERING WHEEL CONTROLS PLEASE USE FK-969

Hyundai Antenna Adapter (21-130)

Hyundai /Kia radio antenna cable adapter for converting the original car radio plug to use with aftermarket head units. This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.

Steering Wheel Control Interface (29-692)

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unit. This interface includes PHONE commands for compatible Bluetooth head-units.

PLEASE NOTE: Some model Kia and Hyundai cars have original fit amplifiers. If the car has the original fit amplifier it will often have ISO connectors, the amplifier is a digital switch on and will need to be bypassed. This interface is not suitable for cars with an original amplifier.

29-Series Universal Patch Lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Double DIN Fascia with Brackets (50-969)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN after market version in a Hyundai I10 (2013 Onwards) This fascia is for right hand drive cars and has mounting point for the original hazard switch and passenger airbag light units. This fascia has side fixing brackets so there is no need for a radio cage.

COLOUR: MATT BLACK

PLEASE NOTE: For Single DIN fitting please use an additional pocket, part number 50-058

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.