Holdenl (Pre 2006/ ISO) Single DIN car stereo fitting kit (MATT BLACK/ WITH SWC)

Car audio fitting kit to install an aftermarket Single DIN car stereo and retain use of the factory steering wheel controls in select Vauxhall, Opel and Holden (Pre 2006) car models with factory fitted head units with ISO connections at the back of the radio. This fitting kit allows the fitting of an aftermarket Single DIN car stereo into the cars factory dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. A car radio ISO lead and steering wheel control interface is also included, allowing the fitting of an aftermarket car stereo upgrade by adapting the original connector to standard aftermarket ISO connectors, as well as retaining use of the factory steering wheel audio controls. 

This head unit fitting kit includes:

• ISO to DIN Antenna adapter (21-100)
• Vauxhall, Opel, Holden steering wheel control interface (29-609)
• 29-Series Universal patch lead (29-025)
• Single DIN Matt Black car radio fascia adapter (50-165)
• Vauxhall/ Opel radio release keys (52-012)

PLEASE NOTE: For vehicles without steering wheel controls please use FK-165-ISO

PLEASE NOTE

Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The main radio connections on compatible cars will be two 8 pin connectors. Cars that are not compatible with have one big quad lock connector with a lever to remove from the back of the radio. Later cars with the quad lock connector require this CANBUS steering wheel control interface.

For vehicles without steering wheel controls please use FK-165-ISO

ISO to DIN Antenna adapter (21-100)

Antenna adapter cable for European cars that have an ISO original style antenna cable. This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.

Vauxhall, Opel, Holden steering wheel control interface (29-609)

Car radio ISO cable and steering wheel control interface, allowing you to connect an aftermarket car stereo by adapting the original radio connector behind the factory radio to European ISO standard, as well as retaining the vehicles factory steering wheel audio controls. This cable swaps the ignition and +12v memory power supply needed for Vauxhall cars. Suitable for multiple Vauxhall, Opel and Holden vehicles which have ISO connections for the radios on the back of the original radio. Check your car and the original radio fitted before ordering, if in doubt remove the original radio. The main radio connections on compatible cars will be two 8 pin connectors.

PLEASE NOTE: For vehicles without steering wheel controls please use FK-165-ISO

29-Series Universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Single DIN Matt Black car radio fascia adapter (50-165)

Replacement car audio fascia to enable you to change the original radio in select Vauxhall vehicles to a Single DIN aftermarket version. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia has a fixed pocket

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.