Ford Transit Connect MK2 (2014-2019) Single/Double DIN Car Stereo Upgrade Fitting Kit (WITH DISPLAY)

Complete stereo upgrade fitting kit to install a Single/Double DIN aftermarket car stereo and retain the use of the steering wheel controls in Ford Transit Connect MK2 (2014-2018) vehicles (WITH AN ORIGINAL TOP DISPLAY).

This Head Unit Fitting Kit Includes:

• Fakra to DIN antenna adapter cable (21-106)
• Steering wheel control interface (29-CTF08)
• 29-CT Series patch lead (29-CT-025)
• Single/Double DIN fascia (50-936)

PLEASE NOTE: Passenger Airbag button already installed in the fascia. OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.

Fakra to DIN Antenna Adapter Cable (21-106)

Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Steering Wheel Control Interface (29-CTF08)

Specific Ford cars 2012 onwards with original OEM parking sensors that are lost when radio is removed.  Audio Steering wheel interface allowing use of original buttons with a new aftermaket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new parking buzzer. Includes CAN ignition and speed pulse for Navigation systems.

29-CT Series Patch Lead (29-CT-025)

Universal patch lead for 29-CT series steering controls, Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready.

Single/Double DIN Fascia (50-936)

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN after market version. This fascia is supplied with side brackets for fitting the stereo. Therefore no fitting cage is needed. The fascia comes with an additional pocket to allow a single DIN radio installation.

PLEASE NOTE:

• This kit comes with the passenger Airbag button already installed in the fascia.
• An additional OEM lock and hazard switch assembly (FORD-F1519127) may be required if the original can not be retained.
• This kit is only for vehicles with an original display screen above the radio.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.