Peugeot Boxer Reversing Rear View Camera Kit

A high-quality rear view reversing camera kit solution, designed to work with your Peugeot Boxer's factory fitted Uconnect 5 infotainment head unit. This retrofit solution is compatible with vehicles manufactured from 2013 onwards. The solution includes a brake light camera, which provides guidelines. The high quality camera provides a clear & crisp image on the infotainment screen to aid you with reversing and parking.

Benefits of having a reverse camera in your Peugeot Boxer

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blindspots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Brake Light Camera

A Colour rear view camera for Peugeot Boxer vans, featuring a 1/3” colour CMOS camera lens for best image reproduction quality. This unit replaces the original Brake Light. This reversing camera is specially designed for Peugeot vehicles. The camera includes a 15M video extension RCA cable kit which allows easy plug and play installation. Just remove the existing brake light and replace it with the brake light reversing camera, which is also equipped with a Brake light. The camera is water proof and shock tested. 

Camera Specifications

• Camera	Sensor	1/3 CMOS
  	TV System	PAL/NTSC
  	Camera Ir LED	9pcs IR lamp with excellent night vision
  	Min IIIumination	0.1Lux@(F1.2,AGC ON);0Lux With IR
  	Electronic Shutter	Auto:PAL 1/50s(NTSC 1/60s)~1/100,000s
  	Focus	2.4mm
  	Lens Interface	M12
  	F.O.V	133° (D)、106°（H）、76°（V）
  	Backlight Compensation	Auto
  	Resolution	700TVL(AHD 720P)
  	Signal to Noise ratio	Better than 48dB
  	LED Light NUM	None
  Interface	Video Output	1Vp-p Composite Output(75Ω)
  	Audio Input	N/A
  	Audio Output	N/A
  	Camera Connect	4 Pin Aviation Female Interface
  	LED Power Interface	2PIN（DC 12V）
  General	Material	Metal& Plastic
  	Operating Temperature	-30℃~80℃
  	Operating Voltage	DC9-36V±10%(From Reversing Monitor DC12V)
  	Power	2.4W
  	Waterproof	IP69
  	External Dimensions	265.1*46*106.4mm(L*W*H)
  	Weight Approx	215g

*Installation is optional via the dropdown

Refer to the compatibility section to check your vehicle variant is supported.

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.