Rear View Camera Kit for Renault Captur with R-Link

An integrated high quality rear view camera kit, designed to work with your factory R-Link Navigation system. A discreet Bolt-on camera that will give you guidelines and with its unique Sony CCD lens the resulting image on the screen is fantastic.

Bolt-On Camera

The high quality Sony lens with CMOS chip set, is drilled in just above the number plate which gives a discrete look, just like it has been factory fitted. The CMOS chip set will give you a clear and sharp picture in low light conditions, also the camera will work perfectly well in rainy conditions.  

Specifications

• IP Rate – IP67 (waterproof/ dust resistant)
• 120 Degree viewing angle
• Illumination down to 0.2 lux
• Displays parking grid lines
• Resolution 648,488 pixels
• NTSC video source
• Dimensions 32mm x 35mm x 25mm
• 7.5mm bore hole

This kit has been specially designed for the Renault Captur with R-Link Navigation Stereo and has been perfected to work integrated with the factory fitted screen. 

NOTICE: The interface has to be installed in the monitor panel (the cover needs to be opened temporarily)

Benefits of having a reversing rear view camera kit

• Guidelines can be really helpful so the driver knows the width of the vehicle to park.
• Clearly show the ground behind the car, of which may not normally be visible from the driver’s view (blind spots)
• Greater vehicle safety management
• Makes driving much more convenient

*Installation is optional via the dropdown

Refer to the compatibility section to check your vehicle variant is supported.

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.