Peugeot Expert, Partner Double DIN stereo fitting kit (WITH SWC and PDC)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit in Peugeot car and van models.

Fitting Kit Includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control/ parking sensor retention interface (39-PGA-PDC)
• Double DIN fascia adapter trim (50-743)
• 103mm high Double DIN cage kit (51-012)

PLEASE NOTE: Only suitable for vehicles with steering wheel controls and factory parking sensors

Fakra to DIN antenna adapter (21-106)

Male Fakra to Male DIN antenna adapter cable.This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control and parking sensor retention interface (39-PGA-PDC)

CANbus steering wheel control and parking sensor retention interface for Peugeot cars with quadlock connectors behind the radio.
This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.
It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio. This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

Double DIN fascia adapter trim (50-743)

Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade.This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio.

COLOUR: MATT BLACK

103mm high Double DIN cage kit (51-012)

Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.

Note: This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.