Peugeot Expert, Partner Double DIN Stereo Upgrade Fitting Kit (WITH SWC)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in Peugeot car and van models.

Fitting Kit Includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control interface (49-PGA-01)
• 49 universal patch lead (49-025)
• Double DIN fascia adapter trim (50-743)
• 103mm high Double DIN cage kit (51-012)

Fakra to DIN antenna adapter (21-106)

Male Fakra to Male DIN antenna adapter cable.
This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade.
This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control interface (49-PGA-01)

This CANbus interface will allow you to retain the audio steering wheel controls when installing an after market head unit.

This interface will also allow the steering wheel controls to access the display screen menu.

The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.

This interface needs to be used along with a 49- series patch lead to suit the make of radio being fitted.

For vehicles with original fit parking sensors, add item 25-514 or use a different interface  39-PGA-PDC.

Universal SWC Patch Lead (49-025)

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

FOR UNBRANDED/ CHINESE HEAD UNITS YOU WILL REQUIRE A DEDICATED 49-000 PATCH LEAD 

Double DIN fascia adapter trim (50-743)

Radio fascia adapter panel to allow the fitting of an aftermarket Double DIN Car stereo upgrade.
This fascia is a trim piece that covers the radio cage to give a professional finish when installing an aftermarket double DIN radio.

COLOUR: MATT BLACK

103mm high Double DIN cage kit (51-012)

Car audio metal cage kit 103mm high. This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.

PLEASE NOTE: For vehicles with factory parking sensors please use FK-743-PDC

Note: This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.