Ford EcoSport (2013-2019) Double DIN Car Stereo Upgrade Fitting Kit (WITH SWC/PDC/SWITCH)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in select Ford EcoSport (2013-2019) car models.

This Stereo Upgrade Fitting Kit Includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control/ parking sensor retention interface (29-CTF08)
• Universal patch lead (29-CT-025)
• Double DIN fascia kit (50-946)
• Ford OEM lock and hazard switch (FORD-F1519127)

PLEASE NOTE: Modification to the dashboard is required. An additional Lock/ Hazard Switch (FORD-F1519127) is included if the original cannot be retained.

The interface in this fitting kit also maintains date, time & temperature display and retains the OEM parking sensor audio by using a new parking buzzer. Also includes CAN ignition and speed pulse for Navigation systems.

PLEASE NOTE: Some dashboard modification is required for the installation of this product. The OEM stereo cannot be reinstalled after these modifications have been made.

Sometimes the built-in combination switch cannot be removed from the vehicles factory fitted fascia surround and must be replaced. An additional Lock/ Hazard Switch (FORD-F1519127) is included if the original cannot be retained

Fakra to DIN Antenna Adapter (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering Wheel Control/ Parking Sensor Retention Interface (29-CTF08)

CAN-Bus Steering Wheel Control Interface for Ford (2012 Onwards) vehicle models. Retains steering wheel controls, parking sensor audio and allows time/date change from the steering wheel.

Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Also maintains date, time & temperature display, OEM parking sensor audio with new  parking buzzer. Includes CAN ignition and speed pulse for Navigation systems.

Universal Patch Lead (29-CT-025)

Universal patch lead for 29-CT series steering controls. Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed.

Ford OEM Lock and Hazard Switch (FORD-F1519127)

Original Ford lock and hazard switch assembly. Use when changing the radio in a Ford vehicle that has the original locking and hazard switch built into the original radio.

Double DIN Fascia Kit (50-946)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.

COLOUR: GLOSS SILVER

PLEASE NOTE: Some dashboard modification is required for the installation of this product

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.