Nissan Juke 1st Gen Facelift (2014-2019) Double DIN Car Stereo Upgrade Fitting Kit (GLOSS BLACK)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel controls in select Nissan Juke 1st Gen Facelift (2014-2019) car models.

This Head Unit Fitting Kit Includes:

• Nissan rectangle to DIN car aerial antenna adapter cable (21-118)
• Nissan (20 pin) steering control interface (29-683)
• 29-Series universal patch lead (29-025)
• Nissan Juke (2014-2019) Double DIN fascia (50-972)

Nissan Rectangle to DIN Car Aerial Antenna Adapter Cable (21-118)

Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo.

Nissan (20 pin) Steering Control Interface (29-683)

Steering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels).

29-Series Universal Patch Lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Nissan Juke (2014-2019) Double DIN Fascia (50-972)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia includes side fixing brackets so no fitting cage is required 

PLEASE NOTE: For Single DIN installation you will require an additional pocket.

COLOUR: GLOSS BLACK

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.