Double DIN Fitting Kit (NAVIGATION SYSTEMS)

Upgrade your van’s factory navigation or touchscreen system with this Double DIN stereo fitting kit designed for Renault Trafic, Nissan NV300, Fiat Talento, and Vauxhall Vivaro (2014+). Specifically created for models fitted with 7-inch touchscreen systems, including the 7" Touch Radio Nav in Fiat Talento and Navi 50 IntelliLink in Vivaro, this kit ensures seamless integration of a modern Double DIN aftermarket head unit.

The kit includes a matt-black fascia adapter panel that blends perfectly with the vehicle’s interior, a steering wheel control interface to retain OEM audio controls, a universal head unit patch lead, and both aerial and DAB adapters for full radio connectivity. Together, these components deliver a reliable, professional-grade installation.

Important Notes:

On some late vehicles around 2018 and newer, a separate ignition live feed may need to be manually wired as these vehicles might not have it in the original radio plug.
Some vehicles with Stop‑Start feature will require an interface to be installed inline with the power ISO plug of the new stereo. The interface allows the unit to stay powered when the vehicle engine shuts down and restarts. If you are experiencing this with your new installation, you will need a 10‑603 adapter in addition to the fitting kit.

This kit is only compatible with vehicles equipped with factory 7 Inch Touchscreen navigation systems. Standard radio-only vehicles require a separate standard Double DIN fitting kit.

This Head Unit Fitting Kit Includes:

Fakra Male to SMB Female DAB Adapter

Use this adapter to adapt a fakra DAB connector in a car to a DAB SMB connector on an after market DAB radio.

Fakra to DIN Aerial Adapter Cable with 12V Phantom Power

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Vauxhall Vivaro, Renault Trafic, Nissan NV300 (2014 Onwards) Audio SWC Interface

This interface will allow you to retain the use of the steering wheel controls on vehicles with an original fit navigation unit. This interface also adapts from the white connector in the vehicle to standard after market ISO connectors. This interface will give volume, seek/track, source and telephone commands to compatible after market head units.

Universal Patch Lead for 29 Series Interface

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Replacement Car Audio Fascia (Matt Black)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This kit uses side fixing brackets to mount the new radio for a flush fit, so no cage is required. For single DIN fitting a universal pocket will need to be acquired.

PLEASE NOTE: ONLY SUITABLE FOR MODELS WITH ORIGINAL OEM NAVIGATION SYSTEMS , FOR MODELS WITH BASIC STANDARD RADIOS PLEASE USE FK-942.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.