Double DIN Car Stereo Fitting Kit (STANDARD WITH PDC)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit, retain the use of the steering wheel audio controls and parking sensors tones in Citroen Dispatch, Peugeot Expert and Toyota ProAce (2016 Onwards) vehicles with a standard radio system.

This Complete Head Unit Fitting Kit Includes:

• Fakra to DIN antenna adapter (21-123)
• Steering wheel control/ parking sensor retention interface (39-PGA-PDC)
• Double DIN fascia adapter panel (50-976)

Antenna Adapter (21-123)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Steering Wheel Control and Parking Sensor Retention Interface (39-PGA-PDC)

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio. This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.

It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio. This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

Double DIN Fascia Adapter Panel (50-976)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation.

COLOUR: MATT BLACK

PLEASE NOTE:

• IF YOUR VEHICLE HAS FACTORY DAB YOU MAY REQUIRE AN ADDITIONAL FM/DAB SPLITTER (SOLD SEPERATELY)
• Only Suitable for vehicles with original factory fitted Basic radios and OEM reverse parking sensors

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.