Holden Single DIN car stereo upgrade fitting kit with Steering Controls (CHAMPAGNE BEIGE/ SATIN)

Complete stereo upgrade kit to install a Single DIN aftermarket car stereo and retain the use of the steering wheel controls in select Holden vehicles.

This unit fitting kit includes:

• Fakra to DIN aerial adapter, 12v phantom power (Part of 29-UC-050-VAUX)
• Steering wheel control interface (29-UC-050-VAUX)
• UNICAN patch lead set (29-UCCAB-SET) 
• Single DIN fascia CHAMPAGNE BEIGE/ SATIN STONE (50-230/7)

PLEASE NOTE: To remove the original radio, you will require radio release keys, part number 52-012 

Fakra to DIN aerial adapter cable with 12v phantom power (Part of 29-UC-050-VAUX)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Steering wheel control interface (29-UC-050-VAUX)

CANbus interface to maintain the steering wheel controls. This interface will also adapt from the quadlock connector in the car to standard after market ISO connectors. Provides a CANbus, powered antenna, ignition output, speed pulse, reverse gear signal and hand brake signal. This interface will also allow you to use the car's original steering control buttons to access the original display screen to update the time and date settings.

UNICAN patch lead set (29-UCCAB-SET) 

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

This fitting kit comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units

Single DIN fascia CHAMPAGNE BEIGE/ SATIN STONE (50-230/7)

This fascia adapter panel is to fit a Single DIN aftermarket radio. The fascia adapter allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia is a Champagne Beige/ Satin Stone finish, commonly found in various Holden cars.

COLOUR: CHAMPAGNE BEIGE/ SATIN STONE

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.