Mercedes CLK (C209) facelift (2005-2009) Single DIN car stereo fitting kit (MATT BLACK)

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Mercedes CLK (C209) facelift (2005-2009) car models.

This unit fitting kit includes:

• Fakra to DIN antenna adapter cable (21-106)
• Steering wheel control interface (49-MB-02)
• Universal patch lead for steering control interface (49-025)
• Mercedes Single DIN car audio fascia adapter (50-258)

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control interface (49-MB-02)

Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip and phone buttons. Note; the operation of these buttons can be dependent on the vehicle spec and radio compatibility. The CANbus interface will also provide ignition, illumination, speed pulse, hand brake and reverse gear output signals to the new radio.

Universal patch lead for steering control interface (49-025)

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

Single DIN car audio fascia adapter (50-258)

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version. A removable pocket is included for Single DIN installation.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.