Rear View Camera Kit for Audi A1 with RMC Head unit

An integrated high quality rear view camera kit, designed to work with your factory RMC head unit. A replacement boot grab handle camera that will give you moving guidelines and with its unique Sony lens the resulting image on the Screen is vivid and clear.

Boot Grab Handle Camera

The camera seamlessly replaces the boot handle. The SONY chip set will give you a clear and sharp picture in low light conditions, also the camera will work in rainy conditions. 

Specifications

• IP Rate – IP67     {(6) Protection from contact with harmful dust (7) Protected from immersion in water with a depth of up to 1 meter (or 3.3 feet) for up to 30 mins}
• 170 Degree viewing angle
• Illumination down to 0.1 lux
• Displays parking grid lines
• Resolution 520 (TV line)
• NTSC format
• Dimensions 34mm x 30mm

Addons Available for Camera Kit*

If you select the optional installation then this product will be professionally installed at your home or workplace anywhere in the UK by our own network of accredited engineers.

* Please select from the addons menu to purchase installation.

Please note: As with all external lenses on the vehicle, the camera lens on this kit will be affected by road traffic grime over time and will need to be cleaned to ensure a clear image capture. 

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.