Audi A3 (8P) (2006-2013) Single/Double DIN fitting kit with CANbus/SWC (REAR AMPLIFIED)

Complete stereo upgrade fitting kit to install a Single or Double DIN head unit and retain the original steering wheel controls in Audi A3 8P facelift (2006-2013) cars.

This head unit fitting kit includes:

• Antenna adapter cable (21-139k)
• Steering wheel control interface for plug and play installation (49-AUD-02)
• Quadlock to ISO plug and play adapter lead (part of 49-AUD-02)
• Universal patch lead for steering control interface (49-025)
• Fascia adapter panel (50-271)

Double Fakra to DIN aerial adapter (Phantom Power) with Bullet connector (21-139K)

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

Audi Quadlock CAN steering wheel control interface and audio adapter cable for rear amplified cars (49-AUD-02)

This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The CANbus steering wheel control interface will retain the use of the original radio controls on the steering wheel with an aftermarket stereo. The CANbus interface generates a key present ignition supply to the new stereo, this means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel. The interface also generates speed pulse, reverse gear and handbrake output signals, these are used when installing multimedia, navigation units and reverse cameras. This interface is built into the Quadlock to ISO harness adapter so installation is plug and play.

The plug and play Quadlock to ISO cable also has a built in high to low level adapter for the rear amplified speakers.  The adapter allows the new stereo to work with the original amplifier which drives all the speakers in the car and the subwoofer. The high to low level adapter gives a much cleaner audio signal to the amplifier compared to using line output phono leads.

Universal patch lead for steering control interface (49-025)

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

Audi A3 (2003-2013) Single/Double DIN car audio fascia adapter with removable pocket (50-271)

Replacement car audio fascia to enable you to change the original radio in the car to a Single and Double DIN aftermarket version. A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

PLEASE NOTE:

• For a double din installation please use 50-702
• The fascia will require a standard 113mm high metal cage as used by most aftermarket head-unit manufacturers. This cage is normally provided with the unit. If not, you will need our cage item number 51-013.
• A flush mount PRO-fit style fascia is also available, please see 50-271-PRO

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.