Porsche Cayenne (03-06) Single/ Double DIN car stereo fitting kit (CDR23/ PCM2.1/ STANDARD AUDIO)

Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket car stereo and retain the use of the steering wheel audio controls in select Porsche Cayenne car models with CDR23/ PCM2.1 systems (ISO connection) without Bose audio.

This head unit fitting kit includes:

• Male Fakra to DIN antenna adapter (21-106)
• Steering wheel control interface (39-PO-ISO)
• Universal patch lead (part of 39-PO-ISO)
• Single/ Double DIN fascia (50-324)
• Double DIN radio cage (51-012)

PLEASE NOTE: For Porsche models with BOSE audio please use FK-324-ISO-BOSE

Male Fakra to DIN antenna adapter (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control interface (39-PO-ISO)

CANbus steering wheel control interface for Porsche Cayenne (2002-2007) car models with original ISO connections behind the radio. This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo. Phone functions included for Alpine, Pioneer.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

Double DIN fascia fitting kit (50-324)

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version. A removable pocket is included for Single DIN installation.

COLOUR: MATT BLACK

Double DIN radio cage (51-012)

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.

This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascias that have 103mm high hole sizes.
Complete with fixings to attach to the new car radio body.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.