Renault Megane III (2008-2012) Single DIN car stereo upgrade fitting kit (MATT BLACK)

Complete stereo upgrade kit to install a Single DIN aftermarket car stereo and retain the use of the steering wheel controls in a Renault Megane III (2008-2012), without an original OEM navigation system.

This head unit fitting kit includes:

• Fakra to DIN aerial adapter cable with 12v phantom power (21-123)
• Renault Megane (2008-2012) CANbus steering wheel audio control interface with quad-lock (29-UC-050-REN2)
• UNICAN patch lead set (29-UCCAB-SET) 
• Renault Megane III (2008-2012) Single DIN car radio fascia (50-370)

Fakra to DIN aerial adapter cable with 12v phantom power (21-123)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector. The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

Renault Megane (2008-2012) CANbus steering wheel audio control interface with quadlock (29-UC-050-REN2)

CANbus steering wheel audio control for select Renault vehicles (2008-2012) with quadlock connections behind the original radio This interface will retain the use of the steering wheel control buttons when fitting an after market head unit, as well as providing CANbus outputs, ignition, illumination, speed pulse, handbrake and reverse gear.

UNICAN patch lead set (29-UCCAB-SET) 

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

Renault Megane III (2008-2012) Single DIN car radio fascia (50-370)

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version. Fits Renault Megane III (2008-2016) car models.

COLOUR: MATT BLACK

PLEASE NOTE: Suitable for Renault Megane III (2008-2012) with standard OEM radio, NOT for cars with factory fitted navigation systems.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.