Steering Wheel Control Interface for Mercedes Benz

Mercedes Comand APS NTG2.5

CANbus steering wheel control interface for Mercedes vehicles from 2008 - 2013 with original Mercedes Comand APS NTG2.5 head units.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo.

CANbus steering wheel control interface for Mercedes Benz C-Class (W200, CLK (W209), GL and M-class, Vito and Viano vehicles with original Mercedes NTG2.5 head units.

This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket car stereo head-unit upgrade. It also provides CANbus outputs as well as Ignition, speed pulse, reverse gear, handbrake and illumination signals to the new stereo. For cars with a MOST fibre optic amplifier, it provides a wake up signal and retain the amplifier for the original FM antenna.

For a full list of Compatible vehicles, please see the compatibility section.

NOTES: 

• Clock remains functional but manual clock setting will not be available. To change time, vehicle battery must be disconnected and then reconnected at 1:00 as this is the default time that the clock starts at. Disconnecting the battery permanently removes the date without factory head unit installed.
• To retain reverse camera, use this product in conjunction with 27-269 camera retention interface.
• NOT SUITABLE for retaining steering wheel controls on Chinese/unbranded head units with 2 wire SWC interface (KEY1/KEY2) 

This interface allows the installation of  ALPINE, CLARION, JVC, KENWOOD, PANASONIC, PIONEER, SONY, ZENEC and CHINESE Steering Wheel Learning Brand stereo's to the existing stalk/steering wheel controls of the vehicle.

Features

• Retains steering wheel controls (pre-programmed)
• Retains phone buttons (hard wired)
• CAN ignition output
• Reverse Output, Speed Pulse and Parking Brake Outputs, Illumination
• Retains the amplifier for the original FM antenna (Requires OEM MOST fibre optic amplifier)
• Patch lead included

Package Contains:

• Steering Wheel Control Interface
• Universal Patch Lead - 39-HU-UNI 

* A stereo patch lead is required to install this adaptor, supplied .

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

• Universal Patch Lead - 39-HU-UNI

Note: This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.