Thinkware iVolt Pro BAB-95 - External Battery Pack

Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt PRO BAB-95 External Battery Pack. With its 8.5 A high-speed charging, the external battery is capable of operating a dash cam for up to 27 hours on approximately 50-minute charge. Max recording time will vary by the Thinkware Dash Cam in use.Supports parallel installation of two external batteries to expand battery capacity.

Compatible with all THINKWARE Dash Cam models.

Key Benefits

High Capacity and a Long Run Time
With a capacity of 7500mAh / 96Wh, iVolt Pro BAB-95 gives your Thinkware 2-channel dash cam 66% more power than the iVolt mini and a long run time of up to 27 hours* while in Motion Detection Parking Mode. In Energy Saving Mode, the battery can power the dash cam for up to 960 hours (40 days)* so that your dash cam doesn’t miss an incident while parked for long durations.
_{*Based on 2-channel dash cam in Motion & Detection Mode. Charging and run time may vary depending on the dash cam model and the environment.}

iVolt Battery App
Accompanying the iVolt Xtra is its app, which allows you to check the battery’s status, performance, and temperature. The battery features built-in Bluetooth for easy pairing with your smartphone.

Fast Charging
Despite having a higher capacity than iVolt mini, iVolt Pro can be fully charged in as little as 55 mins*, thanks to the Fast Charging feature. The battery can also be fully charged in 100 minutes* in standard charging mode without affecting the lifespan of the battery. The external battery recharges while you are driving and powers your dash cam when the car’s ignition is off.

Smart Charging
Smart Charging helps protect the battery against unexpected situations like overcharge, over-discharge, sudden input voltage change, and low voltage thanks to the PCM (Protection Circuit Module). It also provides Heat Protection while charging. If the temperature of the dash cam rises to more than 80°C, the battery will automatically cut off its power and the power to the dash cam to protect it. 

Safe LiFePo4 Technology
The battery is made from Lithium Iron Phosphate (LiFePo4) material, which is safer and more stable than lithium-ion, and has a lifespan that is 3 times longer than that of lithium-ion and nickel-based batteries. 

Compatible with Electric Vehicles
iVolt Xtra External Battery can be safely hardwired into both electric and gasoline cars. However, it is not possible to hardwire BAB-95 in some electric vehicles like Teslas because they do not have a traditional fuse box.

Hardwire

Maximum performance for an entirely professional install. 
Looking to extend the duration of the dashcams parking mode, then install the BAB-95 iVolt Pro into your vehicle. The Hardwired version wires directly into your vehicles fuse box, allowing the BAB-95 iVolt to charge whilst the vehicles ignition is on, this allows for the BAB-95 iVolt Pro to be fully recharged in 55 minutes (Fast Charge). The BAB-95 iVolt Pro battery is also fully recharged in approximately 100 minutes while driving (Standard Charge). 

!Please Note the 12v Accessory socket must be ignition controlled!

Recommended for vehicles that use an intelligent battery system (IBS) like some models of BMW, as they often raise an error code detecting the additional power drain whilst in parking mode.

Plug & Play

For customers concerned about their vehicles warranty, a plug & play version designed for a non-invasive install.

Do I need to use a Dash Cam Battery Pack?

Thinkware Dash Cams offer a few different methods in which the device is powered. All Thinkware Dash Cams come standard with a built-in voltmeter and battery protection settings to ensure you will not return to your vehicle with a dead battery. These Voltage Settings can be utilized with the Hardwiring Kit or OBD-II Harness to protect your battery when using Parking Mode. However, If you wish to record an extended amount of Parking Footage, or if you have a Luxury Vehicle/Small Vehicle Battery the Thinkware iVolt Battery Pack may be the right choice for you.

The Benefits of using a Dash Cam Battery Pack

Extended Parking Mode
When Hardwired the Dash Cam will record in Parking Mode for approximately 8 hours (depending on vehicle’s battery and the voltage cut-off setting) before powering down to save power. With the iVolt Mini, your 1 Channel Dash Cam can run for 20 hours, or if you have a  2 Channel Dash Cam, 16 hours in Parking Mode before needing to recharge the battery pack.

 Safe for Luxury Vehicles
If you own a Luxury Vehicle such as a BMW, battery drainage not only means replacing the vehicle’s battery but it can also require the dealership to reset the vehicle’s electronics, which can turn into an extremely expensive fix.

By using a Dash Cam Battery Pack, you will still be able to use our Advanced Parking Mode risk-free.

Avoid Wear and Tear
With a Hardwired Dash Cam, the constant discharge on the battery over a long period of time can cause wear and tear. The iVolt Mini Battery Pack only draws power to charge when you are driving the vehicle, which prevents damage to the vehicle’s battery over time. With the ignition off, the Dash Cam relies solely on the Battery Pack for power, eliminating the need to draw power from the vehicle’s battery completely.

Why use a Dash Cam Battery Pack instead of a Portable USB Battery Pack?

Portable USB Battery Packs feature different technology than a dedicated Dash Cam Battery Pack. Portable USB Battery Packs typically use Lithium-Ion batteries to provide power to the device. Our Thinkware iVolt Mini utilizes a LiFePo4 (Lithium iron phosphate) battery. The LiFePo4 battery is safer for in-vehicle use as it was designed to withhold extreme temperatures. Lithium-Ion Batteries used in these Portable USB Battery Packs have been known to combust under extreme heat. In addition, Portable USB Batteries typically have a long charging time (overnight) compared to our Thinkware iVolt Mini which fully recharges in 45 mins while driving. 

NOTE: This product will only work with hardwired Thinkware Dashcams.  If you currently have a plug and play Dashcam then you will need to purchase a Thinkware hardwire cable. Hardwiring Cable is included in some dash cam bundles. Please check when purchasing.

Standby Time

Specifications - BAB-95

• Output voltage/current: 11.0 V – 14.2 V/2 A MAX
• Charging voltage/current: 
  • LOW (normal-speed charge mode): 14.2 V/4.5 A Max
  • HIGH (high-speed charge mode): 14.2 V/8.5 A Max
• Charging time:
  • LOW (normal-speed charge mode): Approximately 90 minutes
  • HIGH (high-speed charge mode): Approximately 50 minutes
• Use time: Approximately 27 hours (based on a dash cam’s 3.5 Wh power consumption rate)
• Cells: Lithium iron phosphate (LiFePo4)
• Product capacity: 12.8 V/7,500 mAh/96 Wh
• Dimensions/weight: 155 (W) X 216 (L) X 34 (T) mm/Approximately 1.5kg
• Operating temperature:
  • Charging: 0 – 45 °C
  • Discharging: -10 – 60 °C