Turn-Assist-System with ABE 

****   SPECIAL ORDER ITEM - Please Contact us for pricing and availability  ****

Collisions involving commercial vehicles with cyclists and pedestrians are among the most serious accidents, especially for weaker road users. Around 60 percent of all serious truck-bike accidents are avoidable with the use of Turn-assist-system. (according to calculations by the German Insurers Accident Research (UDV) based on its accident database. In compliance with the requirements for Turn-assist-systems by the Federal Ministry of Transport and Digital Infrastructure (BMVI), AXION offers two versions of the Turn-assist-systems.

• AXION ICA-Turn Assist AAS Set 1
• AXION ICA-Turn Assist AAS Set 2 (with Steering angle sensor)

Following successful technical testing by the DEKRA Technical Testing Centre, both variants now have a General Operating License (ABE) from the Federal Motor Transport Authority (KBA). This means that AXION ICA-Turn Assist systems can now be subsidised by the Federal Office for Goods Transport (BAG) under the "Turn-assist-systems AAS" subsidy programme.

The ABE was issued independently of the vehicle type, but the following range of use is defined:
Commercial vehicles of category N2 and N3 and buses (M2 & M3) with more than 9 seats including driver's seat, which meet the following installation conditions. The system must be completely installed on the vehicle in which the driver receives the warning.

The camera must be positioned within the distance of min. 0.2 m - max. 6.0 m from the front edge of the vehicle.
The minimum mounting height is 2.0 m.
The maximum mounting height is 4.0 m.
Further details are described in the instructions.
The turn-assist-system (AAS) is a camera-based system consisting of a side camera for observing the monitored area, a monitor for displaying the camera image and an ECU (control unit), which evaluates the information in the camera image using an intelligent software algorithm and triggers a warning in the event of defined dangerous incidents.

Functionality

The camera of the ICA system detects the area next to the vehicle and monitors an area next to the vehicle defined during the installation during the turning process.
The ICA-Turn Assist system uses a software-based algorithm to detect movements in this area which are classified as defined as dangerous and warns the driver both optically and acoustically by changing the colour of the monitored area in the monitor from green on red, and acoustically via the included buzzer.

The system has a steering angle sensor. It is activated at half a steering angle, or a curve radius, from ≤10m.

As an option, it is also possible to warn the driver by means of the ICA-WLED, a warning LED. We recommend this as an accessory.

Package Content: ICA-Turn Assist AAS Set1

ICA-Control-Box
1 x front/side camera
10m camera line  
CRV 7005M Monitor

Optional Accessories

ICA-WLED: LED warning indicator for mounting on the A-pillar
AVS-Controller: Control unit for adjusting the system during installation
Rear view camera: Various AXION models possible please contact us

Specification

ICA-B2CH Control Box:

DBC 1140202B (150°) Camera:

CRV 7005M Monitor:

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.