POWERVERTER 12/24VDC USB CHARGER

The cutting-edge electronic design has the capability to automatically detect if the device is an Apple or Android device and alter the charging process accordingly for optimum charging. This guarantees that whatever device is connected, be it Apple or Android, phone or tablet, it will always be charged as fully as time and capacity allow to.?

• Can be easily installed into ANY vehicle
• Allows drivers and passengers to access power via a USB lead
• Negates the need for mains electricity on vehicles
• CE and E marked
• Quick and simple installation
• Passengers can access the charger directly
• Can be connected to both 12Vdc and 24Vdc without adjustment
• Automatically detects Apple or Android configuration 

Technical Data 

Input voltage range: 9-32Vdc

Output voltage: 5Vdc

Output Power: 2.1A

Application: Charges all USB devices including Apple and Android

Transient voltage protection: Meets ISO7637-2 International standard for 24V vehicles

Electrostatic voltage protection: Meets ISO10605, ISO14982, >8kV contact, 15kV discharge

Output noise: <50mV pk-pk

Off load current (quiescent current): <1.5mA

Power conversion efficiency: 86%

Operating temperature: -25°C to +60°C to meet this specification table

Storage temperature: -25°C to +100°C

Operating humidity: 95% max., non-condensing

Casework: Black polycarbonate body

Connections Input: 6.3mm push-in flat blade connectors

Output: USB type A single socket

Output indicator: Blue LED output indication

Mounting method: 30mm diameter hole with or without bezel

Dimensions: 58mm overall length (including cover and connectors x Ø37mm) (excluding optional face plate)

Safe area protection:

Over current - Limited by current sensing circuit 
Over heat - Limited to temperature sesning circuit 

Transients - Protected by filters and rugged component selection

Catastrophic protection - Internal fuse

Approvals:

 2004/108/EC The general EMC directive

Regulation 10.04 The automotive directive

93/68/EEC The CE marking directive

AESP5
 

Designed to: EN50498, ISO 7637-2
 

Markings: 

CE and E marked
 

IP Ratings: 

PV USB-1 Closed Cover: IP65

PV USB-1 Open/No Cover: IP30

PV USB-3: IP60

PV USB-Socket Closed Cover: IP65

PV USB-Socket Open/No Cover: IP30