Integrated Rear View Camera Kit Solution

Vauxhall Combo

This retrofit rear view camera kit solution is compatible with Vauxhall Combo vans fitted with the NAC system and manufactured from 2019 onwards.

This is an integrated high-quality retrofit rear view camera kit solution. Designed to work seamlessly with your factory fitted infotainment system. A discreet rear view camera is fitted to provide guidelines and with its high quality lens the resulting image on the infotainment screen is crisp and clear, even in low light conditions.

This kit maintains all of the factory options as standard.  This reversing camera kit solution is available with a number of different camera options, please see options below and these are selectable from the Recommended Add-Ons section above.

Available Camera options

• Bolt-On Camera (Included in the price)
• Brake Light Camera (With additional Cost)

Please select the required Camera from the Recommended Add Ons list above.

Installation is optional via the dropdown

Benefits of having a reversing rear view camera kit

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
  
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blind spots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Bolt-On Camera

The high quality reversing camera unit is drilled in just above the number plate, which provides a discrete look and blends in with the surrounding panelling.  The camera will provide a clear and sharp picture, even in low light and damp conditions.  

Specification

• Auxiliary lines: switched off at the factory (can be switched on)
• Black aluminium housing
• Mirrored image reproduction (adjustable)
• Image sensor type 1/4 '' Colour CMOS (PC7070)
• Video signal NTSC
• Resolution pixels 648 × 488
• DIN protection class IP67
• Triggering 420 TV lines
• Exposure 1 / 50-60 ~
• 1/15000 seconds - Signal to noise ratio = 48db
• Dynamic> 70db
• Light sensitivity <0.2 Lux
• Output signal 1.0Vp-p, 75 OHM
• Automatic white balance
• Automatic video level adjustment
• Operating voltage 6-24 volts DC
• Power consumption 800mW
• Working temperature -40 ° C to + 80 ° C
• Diagonal viewing angle 170 °
• Horizontal viewing angle 140 °
• Construction dimensions camera 32x34mm and 25mm high
• 7.5mm drill hole
• CE certified

Brake Light Camera

This replaces the original Brake Light with one with a camera built in. This reversing camera is specially designed for the Vauxhall Combo. The camera includes a video extension RCA cable kit which allows easy plug and play installation. Just remove the existing brake light and replace it with the brake light reversing camera. The camera is also water proof.

Specifications

• Image   Type  1/3" CMOS
• Night vision  Without IR lamp
• TV System  NTSC/PAL
• Lens Angle  170 (D)、110（H）、90（V）
• IP Rating  IP69K
• Vibration Rate  10G
• Connector  4P lock connector
• Horizontal Resolution  700TVL
• Power consumption   <3W
• Built-in Lens  f: 2.8mm
• Power Consumption  DC 12V (+/-10%)
• Audio  without
• Operation Temperature  -30℃~+70℃.RH95% Max
• Storage Temperature  -40℃~+80℃.RH95% Max
• Certificate  FCC,CE,   E-mark，ISO9001,   RoHS

Refer to the compatibility section to check your vehicle variant is supported.

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.