Rear View Camera Kit for Ford Transit Custom (SYNC 2.5)

This retrofit rear view camera kit solution is compatible with cars fitted with the Sync 2.5 system.  The system can be identified by the "Four icons" at the base of the touch screen (See image below).  Also,  when you access "About SYNC" under the "Settings Menu" it should read SYNC and NOT SYNC3 (See image below)

An integrated high-quality retrofit rear view camera kit solution. Designed to work seamlessly with your factory fitted infotainment system. A discreet rear view camera is fitted to provide guidelines and with its high quality lens the resulting image on the infotainment screen is crisp and clear, even in low light conditions.

Please select the required Camera from the Recommended Add Ons.

Benefits of having a reversing rear view camera kit

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
  
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blind-spots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Bolt-On Camera

The high quality reversing camera unit is drilled in just above the number plate, which provides a discrete look and blends in with the surrounding panelling.  The camera will provide a clear and sharp picture, even in low light and damp conditions.  

Specification:

• IP Rate – IP67 (waterproof/ dust resistant)
  
• 170 Degree viewing angle
• Illumination down to 0.1 lux
• Displays parking grid lines
• Resolution 520 (TV line)
• NTSC format
• Dimensions 34mm x 30mm

Number Plate Light Camera

Colour rear view camera for Ford - Transit / Transit Custom. SONY 1/3” colour CCD camera lens for best reproduction quality. Replaces the original number plate light for easy installation.

This reversing camera is specially designed for Ford vehicles. The camera is complete including video extension RCA cable kit which allows easy plug and play installation. Just remove the existing license plate light and replace it with the reversing camera which is also equipped with a light. The camera is water proof and shock tested to IP68 certification level. All the oe cameras are Sony CCD lenses and chipsets, with grid lines and 170 degree angle lens.

Features:

• Visual Display:  Yes
• Distance to Object indicator:  Yes
• IP rating:  IP68
• Screen Resolution:  480 (TV Lines)
• Lens Angle (In Degrees):  170
• Image:  Mirror
• Storage Temperature:  -40 C to +80 C
• Operating Temperature:  -20 C to +70 C
• Image Sensor:  Colour 1/3"SONY CCD
• Camera Sensing area:  4.9 x 3.7 mm
• Dimensions - 57mm x 25mm

Number Plate Light Camera

This  kit maintains all of the factory options as standard. A Camera activator is supplied with this kit. NOTE: once used on one vehicle the activator will not work with other vehicles. It is important to keep this activator safe as it can be used again only on the same vehicle if needed.

Installation is optional via the dropdown

Refer to the compatibility section to check your vehicle variant is supported.

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.