Volkswagen Touareg Double DIN car stereo fitting kit (CANbus Ignition)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and generate a key present ignition supply in Volkswagen Touareg I (2003-2009) vehicles with factory Delta/ RNS2 radios.

Fitting Kits Includes:

• VW radio adapter harness, with CANbus ignition (20-156-IGN)
• Fakra to DIN antenna adapter cable (12v phantom) with bullet connection (21-123K)
• VW Touareg Double DIN fitting kit (50-716)
• 103mm double din fitting cage kit (51-012)

PLEASE NOTE: For vehicles with steering wheel controls, please use fitting kit FK-716-SWC

VW radio adapter harness, with CANbus ignition (20-156-IGN)

ISO adapter harness for Volkswagen group vehicles with quadlock connectors at the back of the radio. This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.

This lead has a built in CANbus interface which provides a key present ignition power supply. A key present ignition supply will generate an ignition feed to turn the head unit on with the first position of the key, the interface will continue to give an ignition feed to the radio when the key is turned back to the off position, the ignition feed stops only when the key is then removed from the ignition barrel.

Fakra to DIN antenna adapter cable (12v phantom) with bullet connection (21-123K)

Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection. This antenna adapter cable adapts from the original Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.

VW Touareg Double DIN fitting kit (50-716)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia is designed to replace the wider rectangular OEM radios.

Double DIN metal cage kit (51-012)

This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system. It is used along with fascia's that have 103mm high hole sizes. This cage kit comes complete with fixings to attach to the new car radio body.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.