
Dashmount 71332 Upper Console Mounting Bracket Mercedes C-Class W203 Coupe 2001 - 2006
- Stock Availability: Out Of Stock
- Item Condition :
- Model: 71332
Mounting Bracket
The (71332) dashmountTM bracket will enable you to fit your car phone cradle, phone holder or iPod cradle without having to make screw holes in the dashboard fascia of your vehicle. All DashmountTM mounting brackets are TUV safety approved, beware of cheaper imitations!
Check the compatibility section if supported with your car make and model
Made from top quality steel that has a special black powder coating to ensure a neat finish. These brackets have pre drilled holes and slots to suit most of the common hands free car kit cradles and phone holders on the market. The brackets utilise either tape and grippers or the screws that are already in your vehicle but are hidden from sight. Fitting instructions are included with each bracket purchased - some trim removal may be required.
All DashmountTM brackets should be installed by a suitably qualified person. Neither Car Communications or DashmountTMaccepts any responsibility for any damage caused to the vehicle whilst attempting to install the bracket.
Easy-Fit robust and stylish DashmountTM mounting bracket, giving a damage free installation of mobile phone cradles, iPod Car Kit cradles and other portable devices offering easy access while giving an integrated look with your dashboard and interior. DashmountTM brackets are vehicle specific resulting in optimum design and simple installation for your particular car make and model.
Key Features
- Damage free installation of mobile phone cradle, ipod cradles or other portable devices
- Easy-Fit robust and stylish Dashmount mounting bracket
- TUV safety approved
If you are unsure about the suitability of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
Dashmount 71332
Mercedes Compatibility Chart | |||
Car Model | Year | Description | Notes |
C-Class W203 Coupe | 2001 - 2006 | 1 |
1. May require trim removal tools. Check installation section for further details
If you are unsure about the compatibility of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
You may require trim removing tools for installing this product.
Step 1. Unclip the gaiter panel around the gear lever. Lift up the front section and slide forwards. Set aside so that you can access the ashtray. Remove the two silver retaining clips securing the lower section of fascia
Step 2. Unclip the ashtray assembly by levering the plastic supports towards you.
Lift out the tray and set aside.
Step 3. In the corner of each air vent locate a plastic tab, the lower of two: simultaneously rotate the vent upwards and slide the tab to the right with a screw driver. This will rotate the vents further than their normal operation and enable access to torx screws in the lower section of each vent. Remove these.
Step 4. Repeat the process, but rotate the air vents downwards in order to locate four plastic retaining clips in the upper sections. Depress these with screwdriver to release the assembly.
Step 5. Lift the assembly out and set aside.
Step 6. Locate the bracket with the Torx 20 screw in the upper left corner of the climate control recess.
Step 7. Refit all components in reverse.
SUITABLE FOR VEHICLES FITTED WITH SAT NAV
April 2004 >
Step 1. Unclip the gear shift surrounds.
Step 2. Remove the ashtray.
Step 3. Remove the two Torx 15 screws beneath the ACC panel.
Step 4. Unclip the upper section of the ACC trim.
Step 5. Remove the two Torx 15 screws in the recess beneath the radio/screen.
Step 6. Lever out the housing sufficiently to align the bracket with the left hand screw hole.
Step 7. Refit the screws and panels.
If you require help with installation please submit our enquiry form by clicking ask us about this item found at the top of this page after you have purchased the item. We will more than happily provide free telephone or email support.