Rear View Camera Kit for Ford Transit SYNC 3

This retrofit rear view camera kit solution is compatible with Ford Transit vans fitted with the Sync 3 system.  The system can be identified by the "Five or Six icons" at the base of the touch screen (See image below).  

This is an integrated high-quality retrofit rear view camera kit solution. Designed to work seamlessly with your factory fitted infotainment system. A discreet rear view camera is fitted to provide guidelines and with its high quality lens the resulting image on the infotainment screen is crisp and clear, even in low light conditions.

This kit maintains all of the factory options as standard. A Camera activator is supplied with this kit. NOTE: once used on a vehicle the activator will not work with other vehicles. It is important to keep this activator safe as it can be used again only on the same vehicle if needed.  This Kit is available with a number of different camera options, please see options below and these are selctable from the Recommended Add-Ons section above

Available Camera options

• Bolt-On Camera
• Number Plate Surround Camera
• Number Plate Light Camera (With additional Cost)
• Brake Light Camera (With additional Cost)

Please select the requried Camera from the Recommended Add Ons.

Installation is optional via the dropdown

Benefits of having a reversing rear view camera kit

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
  
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blindspots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Bolt-On Camera

The high quality reversing camera unit is drilled in just above the number plate, which provides a discrete look and blends in with the surrounding paneling.  The camera will provide a clear and sharp picture, even in low light and damp conditions.  

Specification

• Auxiliary lines: switched off at the factory (can be switched on)
• Black aluminum housing
• Mirrored image reproduction (adjustable)
• Image sensor type 1/4 '' Color CMOS (PC7070)
• Video signal NTSC
• Resolution pixels 648 × 488
• DIN protection class IP67
• Triggering 420 TV lines
• Exposure 1 / 50-60 ~
• 1/15000 seconds - Signal to noise ratio = 48db
• Dynamic> 70db
• Light sensitivity <0.2 Lux
• Output signal 1.0Vp-p, 75 OHM
• Automatic white balance
• Automatic video level adjustment
• Operating voltage 6-24 volts DC
• Power consumption 800mW
• Working temperature -40 ° C to + 80 ° C
• Diagonal viewing angle 170 °
• Horizontal viewing angle 140 °
• Construction dimensions camera 32x34mm and 25mm high
• 7.5mm drill hole
• CE certified

Brake Light Camera

This replaces the original Brake Light with camera built in.  This reversing camera is specially designed for Ford Transit vehicles. The camera is includes a video extension RCA cable kit which allows easy plug and play installation. Just remove the existing brake light and replace it with the brake light reversing camera which is also equipped with a IR lamp for enhanced image quality in low light conditions.The camera is also water proof. 

Specifications

• Image Type  1/3" 1/4 Color CCD/CMOS
• Night vision With IR lamp, LED lamp
• TV System  NTSC/PAL
• Lens Angle  120° (D)、95°（H）、70°（V）
• IP Rating  IP69K
• Vibration Rate  10G
• Connector  4P connector or RCA connector for selection
• Effective Pixels   N: 510*492 pixels P: 500*582 pixels
• Horizontal Resolution  420TVL/700TVL
• B.L.C  Back light Compensation (Auto)
• White Balance  Auto White Balance (Auto)
• Minimum Illumination  0Lux (LED ON)
• S/N Ratio  ≥48dB
• Electronic Shutter  1/60~1/100,000 Sec
• Power consumption  ＜3W
• Built-in Lens  f: 2.8mm
• Power Consumption  DC 12V (+/-10%)
• Audio  without
• Operation Temperature  -30℃~+70℃.RH95% Max
• Storage Temperature  -40℃~+80℃.RH95% Max
• Certificate  FCC,CE, E-mark，ISO9001,TS16949, RoHs

Number Plate Surround Camera

The camera is held within a number plate surround.  The number plated will need to be removed, the surround frame will need to be attached to the vehicle and the vehicle's number plate will then need to be attached to the number plate surround.  The kit is supplied with all the neccessary cabelling for an easy install.

Specifications

• IP Rating: Ip66
• Image Sensor: 1/4 Colour CMOS
• TV System: NTSC
• Effective Pixels: 656(H) x 492(V)
• Resolution: 420
• Lens Angle: 170
• Illumination: 0.04Lux/F1.2
• Power Supply: DC12V
• Dimension - 550mm x 140mm

Refer to the compatibility section to check your vehicle variant is supported.

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.