Reversing Rear View (CMOS) Universal Camera - KC903-NTSC

The KC903-NTSC reversing camera with unlimited range of applications in the car, bus, camper, truck or trailer. The housing is weather-resistant, waterproof and very stable manufactured. For mounting the flexible mounting surface of the camera is simply pasted the 3 M adhesive pads in the desired position using. Supplied complete with connection cable and a new mini connector which greatly simplifies installation of the cables. The default image rendering is mirrored, can be set but on unmirrored.

TECHNICAL data

• image reproduction: normal (mirrored adjustable)
• guides: off (on adjustable)
• guides: with/without (adjustable)
• sensor type: 1/3.7 "lens color CMOS (PC3030K) -: 1.7 mm
• triggering in rows: 420TVL
• resolution in pixels: 640 x 480
• picture norm: NTSC - image frequency: 60 Hz
• sensitivity: < 0.5 Lux - diagonal angle of view: 170°
• white balance: automatic
• adjusting the levels: automatic
• output signal: RCA 1.0 VPP 75 Ohm
• working temperature:-40 ° C to + 80 ° C
• operating voltage: 13.8 volts DC - weight : 38 g
• power consumption: 70mA
• dimensions: 70 x 40 x 23.5 mm (Lxwxh)
• Mount: rubber with 3 M adhesive pad - cable length: 700 cm
• Scope of delivery
• camera in the rubber holder
• 700 cm connecting cable
   

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.