Rear View Camera Kit for BMW i3 (NBT EVO)

A high quality rear view camera kit solution for the BMW i3, designed to integrate with the factory fitted BMW NBT EVO infotainment system screen. A discreet rear view camera fitted just above the reg plate, this retrofit kit will provide guide lines with a clear video image on the infotainment screen to aid you in reversing and parking.

Key Features

• Auto switching reverse camera input
• OEM style guidelines
• Works with 6.5" & 10.25" screens
• Any aftermarket device attached to this interface will work on the move
• Fully plug & play 
• This Kit Is Compatible BMW i3 NBT EVO System
   

Benefits Of Having A Reverse Camera In Your BMW I3

• Guidelines can be really helpful so the driver can accurately estimate the width of the vehicle parking space whilst reversing.
• The driver can see any obstructions behind the vehicle during the reversing manoeuvre
• The driver can see any any blindspots which are not visible to the driver
• Greater vehicle safety management during reversing manoeuvres
• Makes reversing much safer and more convenient

Reversing Camera

A high quality rear view camera which features a discrete look, just like the factory fitted option. The camera will provide a clear and sharp picture in low light conditions, also the camera will work perfectly well in damp conditions.  

Technical Data

•  2 different auxiliary lines: switched off at the factory (can be switched on)
•  black matt plastic housing with stainless steel fastening
•  Mirrored image reproduction (adjustable)
•  Image display rotated 180° (adjustable)
•  Image sensor type 1/4 '' 1233 HD Color CMOS Low Light Sensor
•  NTSC video signal output
•  Resolution 960H480V pixels
•  DIN protection class IP69K
•  800 TV lines
•  Exposure 60 fileds per seconds
•  Signal to noise ratio >46dB
•  Dynamic Range >74dB
•  Light sensitivity <0.01 Lux / F1.2
•  Output signal 1.0Vp-p, 75 OHM
•  Automatic white balance
•  Automatic video level adjustment
•  Operating voltage 12 volts DC
•  Power consumption 25-55mA
•  Diagonal viewing angle 188°
•  Horizontal viewing angle 155°
•  Vertical viewing angle 113°
•  Camera dimensions 25.8 x 28.2mm and 20.8mm high
•  8mm mounting hole
•  Working temperature -40°C to +75°C
•  Storage temperature -60°C to +105°C
•  E certified

Scope Of Delivery

• Rear view camera
• Wiring Loom
• Camera Interface

*Installation is optional via the dropdown

NOTE: A reversing camera kit is ONLY a Parking Aid and should not be relied on solely. Please check your surroundings at all times before carrying out a Reversing Manoeuvre. Where Guide lines are included, the guide lines are generic to all vehicles and hence fixed width and not adjustable to the width of the vehicle.