Alfa Romeo Giulietta (2014-2021) Double DIN Car Stereo Upgrade Fitting Kit (Uconnect 5 Inch)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Alfa Romeo Giulietta (2014-2021) car models with a factory UConnect 5 Inch radio systems. This interface included in this kit will also allow vehicle information such as clock adjustment and vehicle settings to be displayed on the new aftermarket head unit.

This Head Unit Fitting Kit Includes:

• Fakra DAB male to DAB SMB female antenna adapter (21-037)
• Fakra to DIN antenna adapter cable (21-123)
• Steering wheel control interface (29-CTUFT01)
• Double DIN Radio fascia (50-896)

PLEASE NOTE: Only suitable for 5 Inch Uconnect radio systems

This interface included in this kit will also allow vehicle information such as clock adjustment and vehicle settings to be displayed on the new aftermarket head unit.

PLEASE NOTE: For Single DIN fitting please use an additional pocket, part number 50-058

Fakra DAB male to DAB SMB Female Antenna Adapter (21-037)

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units)

Fakra to DIN Antenna Adapter Cable (21-123)

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.

The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is a 12v power supply that is sent up the centre wire of the antenna cable, this powers the amplifier built into the original antenna. The antenna adapter cable has a loose wire which needs to be connected to the 12v antenna power output of the new aftermarket stereo.

The phantom power feed terminates in a junior timer receptacle terminal to make it easy to connect into the electric antenna turn on position of a standard ISO connector. We also have this part available with a male bullet connector to make the phantom power lead easier to connect to ISO cables and steering wheel control interfaces.

Steering Wheel Control Info Adapter Interface (29-CTUFT01)

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. This interface will also allow vehicle information such as clock adjustment and vehicle settings to be displayed on the new aftermarket head unit. Suitable for select Alfa Romeo vehicle models with original 5 inch UConnect head units.

Patch Lead

Universal patch lead for 29-CT series steering controls. Suitable for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony and Chinese head-units that are steering wheel remote ready. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Follow instruction to cut loops if needed.

Double DIN Car Stereo Fascia Adapter (50-896)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. Suitable for Alfa Romeo Giulietta (2014-2021) car models

COLOUR: MATT BLACK

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.