Mercedes (AUDIO 5) Single DIN car stereo upgrade fitting kit with steering controls (ISO CONNECTION)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted Audio 5/Sound 5 systems.

This unit fitting kit includes:

• Fakra to DIN antenna adapter cable (21-106)
• Mercedes Audio 5/Sound 5 Steering wheel control Interface (39-MB-A05)
• Mercedes Single DIN car audio fascia adapter (50-257)

PLEASE NOTE: This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Mercedes Audio 5/Sound 5 Steering wheel control Interface (39-MB-A05)

CANbus steering wheel control interface for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems. This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse, reverse, handbrake and illumination signals. Can also be used on some 1st Gen VW Crafter vehicles.

The interface also comes complete with instructions and a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

PLEASE NOTE: This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems

Mercedes Double DIN car audio fascia adapter (50-257)

Car radio Fascia adaptor panel to allow the fitting of an aftermarket Single DIN car radio upgrade. The Fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. Dimensions: 184mm x 114mm

Use the supplied pocket with the fascia adapter panel to fit a single din radio, or remove the pocket and use the fascia trim only to fit a double din aftermarket head unit. For double din installation the fascia takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufacturers.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony or Zenec Head-units.

This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.