Nissan Qashqai, X-Trail (2014 - 2017) Double DIN Car Stereo Upgrade Fitting Kit (GLOSS BLACK)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in select Nissan Qashqai and X-Trail (2014 - 2017) car models.

This Complete Head Unit Fitting Kit Includes:

• Nissan car aerial antenna adapter (21-118)
• Nissan Steering wheel control interface (29-CTSNS011)
• 29-CT universal patch lead (29-CT-025)
• Nissan Qashqai, X-Trail (2014 - 2017) Double DIN fascia (50-943)

PLEASE NOTE: These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24, 32 or 40 pin connector, before purchasing a solution.Includes:

Nissan Car Aerial Antenna Adapter (21-118)

Nissan grey rectangle female antenna connector to male DIN car aerial antenna adapter cable. This cable adapts from the grey plastic rectangle Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio. This is a passive antenna adapter, however there is a loose wire that needs to be connected to the antenna turn on output from the new radio, this turns on the original antenna amplifier in the car.

Nissan Steering Wheel Control Interface (29-CTSNS011)

Steering wheel control interface to retain the use of the vehicles audio steering wheel controls. This interface adapts the original Nissan connectors behind the factory radio to standard ISO connectors used when installing an aftermarket head unit. Will also provide CAN ignition, speed pulse and handbrake outputs and retain the use of the original USB and AUX connections (if required) 

PLEASE NOTE: These cars have various different set-ups behind the radio, please remove the radio and check if you have a 24/32 or 40 pin connector, before purchasing a solution.

29-CT Universal Patch Lead (29-CT-025)

Universal patch lead for 29-CT series steering controls. This cable plugs into the Steering wheel control box and into either the 3.5mm socket or single wire on the back of the head-units. Suitable for Alpine,  Clarion, JVC, Kenwood,  Pioneer, Sony and Chinese head-units that are steering wheel remote ready.

Double DIN Fascia (50-943)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia includes side fixing brackets so no fitting cage is required 

COLOUR: GLOSS BLACK

PLEASE NOTE: For Single DIN fitting, an additional pocket will be required

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.