
Dashmount 71407 Upper Console Mounting Bracket Nissan Primera P11 2000 - 2002
- Stock Availability: Out Of Stock
- Item Condition :
- Model: 71407
Mounting Bracket
The (71407) dashmountTM bracket will enable you to fit your car phone cradle, phone holder or iPod cradle without having to make screw holes in the dashboard fascia of your vehicle. All DashmountTM mounting brackets are TUV safety approved, beware of cheaper imitations!
Check the compatibility section if supported with your car make and model
Made from top quality steel that has a special black powder coating to ensure a neat finish. These brackets have pre drilled holes and slots to suit most of the common hands free car kit cradles and phone holders on the market. The brackets utilise either tape and grippers or the screws that are already in your vehicle but are hidden from sight. Fitting instructions are included with each bracket purchased - some trim removal may be required.
All DashmountTM brackets should be installed by a suitably qualified person. Neither Car Communications or DashmountTMaccepts any responsibility for any damage caused to the vehicle whilst attempting to install the bracket.
Easy-Fit robust and stylish DashmountTM mounting bracket, giving a damage free installation of mobile phone cradles, iPod Car Kit cradles and other portable devices offering easy access while giving an integrated look with your dashboard and interior. DashmountTM brackets are vehicle specific resulting in optimum design and simple installation for your particular car make and model.
Key Features
- Damage free installation of mobile phone cradle, ipod cradles or other portable devices
- Easy-Fit robust and stylish Dashmount mounting bracket
- TUV safety approved
If you are unsure about the suitability of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
Dashmount 71407
Nissan Compatibility Chart | |||
Car Model | Year | Description | Notes |
Primera P11 | 2000 - 2002 | 1 |
1. May require trim removal tools. Check installation section for further details
If you are unsure about the compatibility of this product with your car please submit an enquiry form by clicking ask us about this item found at the top of this page.
You may require trim removing tools for installing this product.
Step 1. Remove the radio utilising the single DIN radio tools. CARE. the tools unlock by pressing THROUGH the normal release tabs and connecting with the release mechanism behind. This process is extremely precise.
Step 2. To remove the unit use the cassette recess but take care not to corrupt.
Step 3. The radio is seated on a rubber mount that fits tightly against the plastic surrounds.
Step 4. The radio can be accessed, with difficulty, from behind via the glove box.
CARS WITH SINGLE DIN UNIT.
Step 1. Unclip the radio panel and remove radio with the tools, simultaneously.
ALL MODELS:
Step 2. In the opening behind the panel you must remove the 2 upper screws. Pull out the air vent. assembly’s lower edge.
Step 3. Locate the Dash Mount arm behind the locating tab on the left hand side and push the air vent. assembly back into position. Insert the screws and tighten
Step 4. Refit the front radio panel by clipping on.
If you require help with installation please submit our enquiry form by clicking ask us about this item found at the top of this page after you have purchased the item. We will more than happily provide free telephone or email support.