DS Automobiles DS3 (2016-2019) Double DIN Car Stereo Upgrade Fitting Kit (WITH SWC and PDC)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit, retain the use of the steering wheel audio controls and parking sensors tones in select DS Automobiles DS3 (2016-2019) car models.

This Aftermarket Stereo Fitting Kit Includes:

• Fakra to DIN antenna adapter (21-106)
• Steering wheel control/ parking sensor retention interface (39-PGA-PDC)
• Double DIN fascia kit (50-982)

Fakra to DIN Antenna Adapter (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering Wheel Control and Parking Sensor Retention Interface (39-PGA-PDC)

CANbus steering wheel control and parking sensor retention interface for Citroen and Peugeot cars with quadlock connectors behind the radio. This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.

It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio. This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Blaupunkt, Clarion, Pioneer, JVC, Kenwood, Sony, Zenec or resistive programming Head-units.

Double DIN Fascia Kit (50-982)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses the original radio brackets for installation of the new radio. This replaces the need for a fitting cage and gives a flush professional appearance to the installation.

COLOUR: MATT BLACK

PLEASE NOTE:

• Dashboard modifications are required, we strongly recommended installation by a professional car audio installer.
• The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tones that are usually lost when replacing the original radio.
• Only suitable for vehicles with steering wheel controls and factory parking sensors
• The installation of this fascia is strongly recommended to be done by a professional installer, modifications to the dashboard are required. See instructions.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.