Chrysler, Dodge, Jeep Single/ Double DIN Car Stereo Upgrade Fitting Kit

Complete stereo upgrade kit to install a Single or Double DIN aftermarket car stereo and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2005-2008.

This Head Unit Fitting Kit Includes:

• FM antenna adapter (21-108)
• Steering control and amplifier retention interface (29-UC-050-CHR1)
• UNICAN patch lead set (29-UCCAB-SET) 
• Chrysler, Dodge, Jeep Single/ Double DIN Fascia (50-304)

FM Antenna Adapter (21-108)

Antenna cable adapter for Saab cars after 2007 that had Delphi Grundig navigation radios. This cable converts the cars existing special aerial plug to an after market DIN type used by most car radio manufacturers.

Steering Control and Amplifier Retention Interface (29-UC-050-CHR1)

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles. This interface connects to the CANbus wires at the back of the radio. These are white and white/orange wires in pins 5 and 6 in the 22 way connector. Vehicles from 2005 generally had the CANbus wires present at the radio. We do recommend removing the head unit to check if the CANbus wires are present if the vehicle around a 2005 production year. The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit. The interface also switches on the original amplifier in the car via a CANbus turn on signal. Gives out speed pulse and reverse gear CANbus signals.

UNICAN Patch Lead Set (29-UCCAB-SET) 

Patch cable set to connect a UNICAN interface between an after market head unit and the steering wheel controls. Can be used with Alpine, Kenwood, JVC (single wire), Pioneer, Sony and Chinese/Resistive learning head units with either two wires or a 3.5mm jack.

Chrysler, Dodge, Jeep Single/ Double DIN Fascia (50-304)

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version, comes with a removable pocket for single DIN fittings and side fixing brackets so no double DIN cage is needed.

PLEASE NOTE: This interface comes with a universal patch lead which can be used with Alpine, Kenwood, JVC, Pioneer, Sony and Chinese/ Resistive learning Head-units.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.