Mercedes (AUDIO 10) Single DIN car stereo upgrade fitting kit (WITH STEERING WHEEL CONTROLS)

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo and retain the use of the steering wheel controls in select Mercedes vehicles with factory fitted AUDIO 10 systems and ISO Connection

This head unit fitting kit includes:

• ISO to DIN antenna adapter cable (21-100)
• Mercedes Audio 10 Steering wheel control Interface (39-MB-A10)
• Mercedes Single DIN car audio fascia adapter (50-180)

PLEASE NOTE: FOR DOUBLE DIN INSTALLATION, PLEASE USE FITTING KIT FK-708

ISO to DIN antenna adapter cable (21-100)

Male ISO to Male DIN antenna adapter. This part adapts from an ISO antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Mercedes Steering wheel control Interface (39-MB-A10)

Steering wheel control interface and radio replacement adapter cable for various Mercedes cars with original Audio 10 radio. The CANbus interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and phone buttons from the steering wheel with the new radio. The CANbus interface will also provide ignition, illumination, handbrake, reverse gear and speed pulse output signals to the new stereo.

Comes with universal patch lead kit.

Mercedes Single or Double DIN car audio fascia adapter (50-180)

Car radio Fascia adaptor panel to allow the fitting of an aftermarket single or double DIN car radio upgrade. The Fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. 

When fitting a double DIN radio the fascia adapter panel takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufactures. If a cage is needed, we sell a matching cage with part number 51-013. To fit a double DIN radio the central plastic bar will have to be removed. For Single DIN installation a pocket is provided.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.