Mercedes Vito (2015 Onwards) Single DIN car stereo upgrade fitting kit with steering controls

Complete stereo upgrade fitting kit to install a Single DIN aftermarket car stereo and retain the use of the steering wheel controls in select Mercedes Vito (2015 Onwards) vehicles

This unit fitting kit includes:

• Fakra to DIN antenna adapter cable (21-106)
• Mercedes Steering wheel control Interface (49-MB-04)
• Universal 49-Series Steering wheel control patch lead (49-025)
• Mercedes Single DIN car audio fascia adapter (50-257)

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Mercedes Steering wheel control Interface (49-MB-04)

This CANbus interface will allow you to retain the audio steering wheel controls (including phone button) when installing an after market head unit. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals. For Mercedes cars with the newer steering control protocol only.

Universal 49-Series Steering wheel control patch lead (49-025)

Universal patch lead to be used with In car Tec 49 series steering wheel control interfaces. Use for Alpine, Clarion, JVC, Kenwood, Pioneer and Sony head units.

Mercedes Double DIN car audio fascia adapter (50-257)

Car radio Fascia adaptor panel to allow the fitting of an aftermarket Single DIN car radio upgrade. The Fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. Dimensions: 184mm x 114mm

Use the supplied pocket with the fascia adapter panel to fit a single din radio, or remove the pocket and use the fascia trim only to fit a double din aftermarket head unit. For double din installation the fascia takes a 113mm high cage, this is the size of cages supplied with all major brand head unit manufacturers.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.