Nissan Elgrand E51 (2002-2010) Double DIN Car Stereo Upgrade Fitting Kit (BOSE AUDIO)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel audio controls in Nissan Elgrand E51 vehicles (WITH BOSE AUDIO). This fitting kit is suitable for Nissan Elgrand models with a separate Hazard Switch and BOSE audio

 This Head Unit Fitting Kit Includes:

• ISO to ISO amplifier integration interface (20-273)
• Antenna adapter (21-114)
• 29-series Steering control interface (29-645)
• 29-series universal patch lead (29-025)
• Double DIN Fascia adapter (50-669)

ISO to ISO Amplifier Integration Interface (20-273)

This interface converts the high level audio output of a new head unit to a low level pre amplified signal which will work with an amplifier. 4 adjustable channels for optimum audio quality, it has a built in ground loop isolator and filters to get the best sound from the amplifier.

Antenna Adapter (21-114)

This cable adapts from the two pin Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket stereo.

29-Series Steering Control Interface (29-645)

Steering wheel control interface and adapter cable for Nissan cars with twin 10 and 6 pin connectors and a smaller 16 pin connector at the back of the radio. The interface and radio adapter cable is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

29-Series Universal Patch Lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted.

Double DIN Fascia Adapter (50-669)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. Suitable for Nissan Elgrand E51 (Right Hand Drive) vehicles.

COLOUR: MATT BLACK

PLEASE NOTE:

• Use the metal brackets from the original radio and fit to the new aftermarket radio
• This fitting kit is suitable for Nissan Elgrand models with a separate Hazard Switch and BOSE audio (See below)

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.