Nissan Juke Acenta Premium and N-Connecta 2014-2019 Double DIN Fitting Kit with Steering Wheel Control and Camera Retention

This complete Double DIN fitting kit is designed to allow the installation of an aftermarket Double DIN car stereo into selected Nissan Juke Acenta Premium and N-Connecta 2014-2019 models. The included fascia panel is specifically listed for Nissan Juke 2014-2019, finished in gloss black, and uses side fixing brackets for a flush, vehicle-specific fit with a fascia opening size of 172mm x 98mm.

The included steering wheel control interface adapts the original 20 pin Nissan connector to standard aftermarket ISO connectors, removing the need for a separate ISO radio replacement cable. InCarTec states that it retains the original volume, track skip, source, phone and preset skip buttons on 8-function steering wheels, while the included universal patch lead allows connection to a wide range of aftermarket stereos from brands including Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and other compatible head units.

This kit also includes a USB retention adapter to maintain the original USB connection and a 24-pin reverse camera retention interface to keep the standard factory reverse camera working with an aftermarket stereo. The camera retention interface converts the factory camera signal for head units with an RCA camera input, while the antenna adapter converts the Nissan grey rectangular antenna connection to a standard male DIN connection for the new radio. The blue wire on the antenna adapter must be connected to the new stereo’s antenna turn-on output to power the original antenna amplifier correctly.

FK-972-CAM Car Compatibility

This fitting kit is only compatible with Nissan Juke Acenta Premium and N-Connecta 2014-2019 models with standard reverse camera. Not compatible with 360 birds eye view camera systems.

If you have a factory BOSE audio system you will require an additional interface, part number 20-273

FK-972-CAM fitting kit includes:

Camera retention interface (27-246)

Installation notes

• Connect the Yellow RCA connector of the camera interface to the camera input connection on the back of the aftermarket head unit.
• Connect the vehicle specific connector (24 Pin) to the cars original wiring harness. 
• Connect the loop on the Black wire of the camera interface to a chassis ground on the vehicle.
• Connect the Purple wire on the camera interface to the new aftermarket head units reverse signal wire. (Please refer to manufacturers instructions)

Nissan (20 pin) steering control interface (29-683)

Steering wheel control interface and adapter cable for Nissan Juke cars to fit an aftermarket radio upgrade. The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels)

Installation notes

• Connect male ISO(S) of the steering wheel control interface to the female ISO(S) of the aftermarket radio lead/head unit
• Loose black wire - Connect the radio ground earth ring to the vehicles chassis ground
• Loose pink wire - Connect the pink wire to the speed pulse connector on the aftermarket radio (Not all radios have this, please check manufacturers instructions)
• Loose blue wire (Amplifier turn-on) - This is only required on amplified systems such as BOSE. If your system is amplified this loose blue wire will need to be connected to the amplifier turn on cable on our amplifier integration interface, part number 20-273 (SOLD SEPERATELY)
• Loose blue wire (Antenna turn-on) - This needs to be connected to the antenna turn on cable on the antenna adapter cable.

29-Series universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces.

Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.