Citroen C1/Peugeot 108/Toyota Aygo Double DIN Car Stereo Upgrade Fitting Kit (WITH SWC)

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the factory steering wheel controls on Citroen C1, Peugeot 108 and Toyota Aygo (2014-2021) car models.

This Head Unit Fitting Kit Includes:

• Car radio ISO connection harness (20-130)
• Aerial antenna adapter (21-147)
• Double DIN fascia adapter (50-650)

PLEASE NOTE: This fitting kit fits Double DIN head units with a maximum depth of 80mm. This fitting kit will also retain the factory USB and AUX functions (if vehicle is equipped)

Toyota to DIN Car Aerial Antenna Adapter (21-147)

This cable adapts from the 2009 onward style Toyota antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade.

The Toyota connector is rectangular with a round antenna terminal inside. The antenna adapter has a loose blue wire, this needs to be connected to the antenna turn on output on the new stereo. This will turn on the original antenna amplifier in the car.

USB Retention Cable (24-250)

Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen, Peugeot and Toyota Aygo cars that have an original USB socket.

Steering Wheel Control Interface (29-707)

Steering wheel control interface and adapter cable Citroen C1, Peugeot 108 and Toyota Aygo cars 2014 onwards. The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.

The cable also provides a speed pulse (for GPS) reverse output (for an aftermarket reverse camera) and handbrake output signal to the new stereo. The AUX 3.5mm jack below the original radio is retained with this interface by connecting the left and right inputs (2 RCAs) found on the back of most double DIN aftermarket radios that don't feature an AUX jack on the front panel. The USB can be retained with part 24-250.

The cable adapts from the connectors in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation. The interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source and phone buttons.

Universal Patch Lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the 29-Series control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. Suitable for Use with Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Double DIN Fascia Adapter (50-650)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. this replaces the need for a fitting cage and gives a flush professional appearance to the installation.

COLOUR: PIANO BLACK

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.