Double DIN Car Stereo Upgrade Fitting Kit (TYPE 6)

Complete stereo upgrade kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel controls in 2010 onwards Vauxhall Movano, Renault Master or Nissan NV400 van models.

This Head Unit Fitting Kit Includes:

• Fakra to DIN car aerial antenna adapter cable (21-106)
• Steering wheel control interface (29-710)
• Universal patch lead (29-025)
• Double DIN fascia with side fix brackets (50-948)

Fakra to DIN Car Aerial Antenna Adapter Cable (21-106)

Male Fakra to Male DIN car aerial antenna adapter cable. This cable adapts from a Fakra connector in the car to a standard aftermarket DIN antenna connector, this is used when fitting an aftermarket stereo upgrade.

Steering Wheel Control Interface (29-710)

This interface will allow you to retain the use of the steering wheel controls in Vauxhall Movano, Renault Master and Nissan NV400 vehicles with an original fit navigation unit. This interface also adapts from the white connector in the vehicle to standard after market ISO connectors. This interface will give volume, seek/track, source and telephone commands to compatible after market head units.

Universal 29-Series Patch Lead (29-025) 

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces. This cable plugs into the ICT control box and connects to the 3.5mm socket or single wire on the back of the new head-unit. This item has loose wires and leads so it can be configured to suit the brand of radio being fitted Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Double DIN Fascia with Side Fix Brackets (50-948)

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version (172mm x 98mm) This fascia includes side fixing brackets so no fitting cage is required. Fits Nissan NV400, Renault Master and Vauxhall Movano (2010 Onwards) car models

COLOUR: MATT BLACK

PLEASE NOTE: Modification to the dashboard is required. The plastic between the original radio and storage pocket needs to be cut away and the plastic behind the radio needs to be trimmed. We recommend this is done by an experienced professional car audio technician.

There are several different original radio options for these vans, this kit is for vehicles with the below style original radios.

This product has been developed through carefully documented data and research. The manufacturer & supplier cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.

Refer to the compatibility section to check your vehicle variant is supported.